Voltage Gate
PASSDevice output type must match generator output.
240V required -> 120V/240V available
No - this pairing is underpowered. Safe target ~6161W running / 6161W surge; the generator provides 3800W / 3800W.
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
Device output type must match generator output.
240V required -> 120V/240V available
Continuous draw with safety buffer applied.
6,161W required -> 3,800W available (2,361W short)
Startup peak with safety buffer applied.
6,161W required -> 3,800W available (2,361W short)
Runtime context only. It does not change the electrical compatibility verdict.
Runtime estimate appears after running and surge gates pass.
Power bars show required versus available output for each gate.
See generators that pass nativelyQuick compatibility, required headroom, and model-specific context at a glance.
0 of 3 models are SAFE or TIGHT. Most demanding model: GE GTD38EASWWS (5,600W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Samsung DVE45T3200W | 5,300W | 5,300W | Fail | โ | OEM Manual |
Show expert analysisTechnical: **Running load:** 5300 W. **Surge:** 5300 W. Requires 240V split-phase. No additional inrush current observed beyond steady-state draw. Your power station must sustain 5300 W continuous output at 240V. Field note: Verify your power station's 240V receptacle is rated for sustained 5300 W loads. Undersized outlets or inverters will trip under this continuous draw. Can I run this dryer on a portable power station? Only if your power source provides 240V split-phase output and can supply 5300W continuous and 5300W surge. Most consumer units lack this capacity. | |||||
| GE GTD38EASWWS | 5,600W | 5,600W | Fail | โ | OEM Manual |
Show expert analysisTechnical: **Running load:** 5600 W continuous at 240V. **Surge:** 5600 W (no motor spike observed). Requires split-phase 240V output. Most portable power stations provide 120V only. Field note: Confirm your power station supports split-phase 240V before attempting connection. Single 120V outlets cannot supply this appliance. Can I run this dryer on a portable power station? Only if your power source provides 240V split-phase output and can supply 5600W continuous and 5600W surge. Capacity must exceed 5600 Wh for one full cycle. | |||||
| LG DLEX4000W | 4,784W | 4,784W | Fail | โ | OEM Manual |
Show expert analysisTechnical: **Running load:** 4784W at 240V split-phase. **Surge:** 4784W (resistive heating element, no motor surge). Requires a power station capable of continuous 240V output at this wattage. Field note: Verify your power station can sustain 4784W continuously on 240V. Many portable units lack the required voltage configuration or sustained wattage capacity. Can I run this dryer on a portable power station? Only if your power source provides 240V split-phase output and can supply 4784W continuous and 4784W surge. | |||||
This unit is outside the compatible set; 3 of 33 generators pass SAFE/TIGHT for this device.
3 of 33 generators are SAFE+TIGHT for Electric Clothes Dryer.
Fit class uses buffered needs (running and surge) for this device.
Clothes Drying Cycle
Select Your Model:
This device typically needs 240V split-phase or a hardwired connection. Most portable stations are 120V-only. Verify the plug type and voltage on the device label/manual before purchase.
These generators meet Electric Clothes Dryer's voltage, running, and surge requirements.
12000W โข 6144Wh
Lowest capacity that still clears surge + running load.
At 3800W continuous, the SuperBase V4600 handles most residential loads comfortably. The conservative surge rating (no hardware surge above continuous) means high-inrush devices like air compressors and well pumps may trigger protection cutoffs โ always check surge requirements. The 4608Wh base capacity provides 12+ hours for moderate loads, and the modular B4600 satellite system scales to 23kWh for multi-day outages. Solar input accepts up to 1500W (150V ร 10A) via XT90, though the single-port design limits parallel panel configurations.
The SuperBase V4600 uses LiFePO4 chemistry rated for 3,000+ cycles. The GridFlow 2.0 system provides 1ms UPS switchover, making it suitable for sensitive medical and computing equipment. The 120V/240V selective output supports both standard and high-voltage appliances. Source: Zendure official US product page (manufacturer documentation).
No. The Zendure SuperBase V4600 falls short on both running (3800W offered vs 6161W needed) and surge (3800W offered vs 6161W needed). Safe targets include a 10% buffer for the Electric Clothes Dryer's heating_element load profile.
No reliable runtime estimate โ this pairing is not compatible. The Zendure SuperBase V4600 cannot safely power the Electric Clothes Dryer. See compatible alternatives above for power stations that meet this device's requirements.
Efficiency Hack: Large appliances like the Electric Clothes Dryer cycle on and off. To maximize the 0 hours of runtime, try to minimize how often you open the device or introduce heat loads.
Compare all 33 generators for the Electric Clothes Dryer
Ranked by budget, runtime, and overall compatibility.
Derived from variant list (max of variants). Running worst case = GE GTD38EASWWS (5600W). Surge = running (resistive heating element โ no motor inrush).
Zendure SuperBase V Official Product Page (US) โ full specifications
Similar-output alternatives you can compare side by side.