Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
Yes - VTOMAN Jump 1500X has enough running and surge power for the Rice Cooker. Target ~1036W running / 1036W surge; the generator provides 1500W / 3000W.
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
Device output type must match generator output.
120V required -> 120V available
Continuous draw with safety buffer applied.
1,036W required -> 1,500W available (464W headroom)
Startup peak with safety buffer applied.
1,036W required -> 3,000W available (1,964W headroom)
Runtime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 0.6h
Device profile reference: up to 0.5h per day.
Power bars show required versus available output for each gate.
View full compatibility reportQuick compatibility, required headroom, and model-specific context at a glance.
3 of 3 models are SAFE or TIGHT. Most demanding model: Tiger JBV-A18U (10-Cup Micom) (941W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Aroma ARC-914SBD (8-Cup Digital) | 350W | 350W | Safe | ~1.7h | OEM Verified |
Show expert analysisTechnical: **Running load:** 350 W. **Surge:** 350 W. Requires 120V AC output. Resistive heating element with no motor inrush. One of the lightest rice cooker loads available. Field note: At 350W this is one of the easiest kitchen appliances to run off-grid. Even a compact 300Wh power station can handle a full cook cycle. Can I run this Aroma rice cooker on a small portable power station? Yes โ at 350W it works on any power station rated 500W+ continuous. A 500Wh battery handles multiple cook cycles. | |||||
| Zojirushi NS-TSC18 (10-Cup Micom) | 820W | 820W | Safe | ~0.7h | OEM Manual |
Show expert analysisTechnical: **Running load:** 820 W. **Surge:** 820 W (no inrush spike). **Voltage:** 120 V AC required. Micom (microcomputer) fuzzy-logic heating draws more than basic rice cookers due to advanced temperature control. Field note: The 10-cup Zojirushi is a mid-range load. Power stations rated 1000W+ handle it with comfortable margin. The fuzzy logic cycling means average draw is below 820W over a full cook. Can I run this Zojirushi on a 500W power station? No โ it draws 820W continuous. You need at least a 1000W-rated power station for safe operation. | |||||
| Tiger JBV-A18U (10-Cup Micom) | 941W | 941W | Safe | ~0.6h | OEM Verified |
Show expert analysisTechnical: **Running load:** 941 W. **Surge:** 941 W. Requires 120V AC output. Micom-controlled heating with no motor inrush. The highest-draw standard rice cooker in this comparison. Field note: At 941W this is the heaviest standard rice cooker load. A 1200W power station handles it with margin. Don't confuse this with induction heating models (1300W+) which are a different class. Why does this Tiger draw more than a Zojirushi of the same size? Heating element wattage varies by design. The Tiger JBV-A18U uses a 941W element vs 820W for the Zojirushi NS-TSC18 โ both are 10-cup micom cookers but with different heating configurations. | |||||
This unit ranks #7 of 25 compatible generators for this device by buffered margin (Overkill class).
25 of 33 generators are SAFE+TIGHT for Rice Cooker.
Fit class uses buffered needs (running and surge) for this device.
Rice Preparation
Select Your Model:
Free Tools
The 3000W surge rating handles moderate motor startup loads including sump pumps, refrigerators, and small power tools. At 828Wh base capacity, runtime is limited โ expect 3โ4 hours on a 200W load or about 30 minutes at full 1500W draw. The expandable 1548Wh battery roughly triples runtime. Solar recharging is the main weakness: the 200W / 30V limit means only small, low-voltage portable panels are compatible. Plan for slow solar recovery (4+ hours for a full charge with a compatible 200W panel).
The Jump 1500X uses LiFePO4 chemistry rated for 3,000+ cycles to 80% capacity. The built-in jump starter adds emergency vehicle starting capability not found in competing power stations. LFP chemistry provides thermal stability for the combined power station and jump starter functions. Source: VTOMAN official US product page (manufacturer documentation).
Keep your Rice Cooker running with solar โข MPPT: 12โ 30V โข Max: 200W
Smart Value 120W Panel
Adapter required: MC4 -> DC5521.
Smart Value 110W Panel
Adapter required: MC4 -> DC5521.
Yes. The VTOMAN Jump 1500X provides 1500W running / 3000W surge. The Rice Cooker needs 1036W / 1036W (including 10% buffer). That leaves 464W of running headroom and 1964W of surge margin.
Approximately 0.6 hours, based on the Rice Cooker's 941W draw and the VTOMAN Jump 1500X's 828Wh capacity (70% usable after real-world losses).
With 255W allocated to the Rice Cooker, the VTOMAN Jump 1500X still has ~4W of margin. These devices could run simultaneously:
Efficiency Hack: Large appliances like the Rice Cooker cycle on and off. To maximize the 0.6 hours of runtime, try to minimize how often you open the device or introduce heat loads.
Compare all 33 generators for the Rice Cooker
Ranked by budget, runtime, and overall compatibility.
Derived from variant list (max of variants). Running worst case = Tiger JBV-A18U (941W). Surge = running (resistive heating element โ no motor inrush).
VTOMAN Jump 1500X Official Product Page (US) โ full specifications
Similar-output alternatives you can compare side by side.