Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
Yes - Pecron E3600LFP has enough running and surge power for the Space Heater (1,500W). Target ~1651W running / 1651W surge; the generator provides 3600W / 7000W.
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
Device output type must match generator output.
120V required -> 120V available
Continuous draw with safety buffer applied.
1,651W required -> 3,600W available (1,949W headroom)
Startup peak with safety buffer applied.
1,651W required -> 7,000W available (5,349W headroom)
Runtime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 1.4h
Typical cycling estimate (65% duty): 2.2h
Device profile reference: up to 4h per day.
Power bars show required versus available output for each gate.
View full compatibility reportQuick compatibility, required headroom, and model-specific context at a glance.
3 of 3 models are SAFE or TIGHT. Most demanding model: Lasko CT16450 (Ceramic Tower) (1,500W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Lasko CT16450 (Ceramic Tower) | 1,500W | 1,500W | Safe | ~1.4h | OEM Verified |
Show expert analysisTechnical: **Running load:** 1500 W (high setting). **Surge:** 1500 W (resistive heating element, no inrush). **Voltage:** 120 V AC required. Ceramic heating element with fan-forced air distribution. Field note: Switch to low mode (900W) to extend runtime by 67% on battery. Thermostat cycling helps too โ once the room reaches target temp, draw drops to zero between cycles. How long can I heat a room on a portable power station? At 1500W on high, a 2000Wh station (1400Wh usable) provides roughly 1 hour of continuous heat. On low (900W), that extends to about 1.5 hours. Thermostat cycling extends these estimates further. | |||||
| De'Longhi TRD40615E (Oil-Filled Radiator) | 1,500W | 1,500W | Safe | ~1.4h | OEM Verified |
Show expert analysisTechnical: **Running load:** 1500 W (high setting). **Surge:** 1500 W (resistive heating, no inrush). **Voltage:** 120 V AC required. Oil-filled radiator with thermal mass โ continues radiating heat after power is cut, unlike ceramic or fan heaters. Field note: Oil-filled radiators are the best space heater type for battery backup. The thermal mass means the unit keeps heating the room even during thermostat off-cycles or after you turn it off โ stretching your battery further than a ceramic or fan heater. Is an oil-filled radiator better than a ceramic heater on battery? For battery efficiency, yes. The oil reservoir stores heat and radiates it passively during thermostat off-cycles. A ceramic heater stops heating the moment power cuts. Both draw 1500W on high, but the radiator delivers more total warmth per Wh consumed. | |||||
| Vornado VH200 (Whole Room Vortex) | 1,500W | 1,500W | Safe | ~1.4h | OEM Verified |
Show expert analysisTechnical: **Running load:** 1500 W (high setting). **Surge:** 1500 W (resistive heating, no inrush). **Voltage:** 120 V AC required. Vortex air circulation distributes heat throughout the room more evenly than directional heaters. Field note: The 750W low setting is useful on battery โ it halves power draw while still circulating warm air via the vortex fan. On a 2000Wh station, low mode provides nearly 2 hours of whole-room heating vs 1 hour on high. Can I use the Vornado VH200 on low mode to save battery? Yes โ low mode draws 750W, half of the 1500W high setting. This doubles your runtime on a portable power station. The vortex circulation still distributes heat effectively at the lower setting. | |||||
This unit ranks #17 of 23 compatible generators for this device by buffered margin (Overkill class).
23 of 33 generators are SAFE+TIGHT for Space Heater (1,500W).
Fit class uses buffered needs (running and surge) for this device.
Winter Storm Backup
Select Your Model:
These systems are often hardwired to a home panel. To run them from a portable station, you may need a transfer switch installed by an electrician. You cannot just plug it in.
Free Tools
The 7000W surge rating handles demanding startup loads including well pumps, air compressors, and window AC units. The dual 1200W MPPT controllers accept high-voltage panel strings (up to 150V), enabling efficient solar recharging in 1.5โ2 hours with 2400W of panels. At 3072Wh base capacity, expect 8+ hours of runtime on moderate loads. The expansion to 15kWh rivals whole-home battery systems.
The E3600LFP uses LiFePO4 chemistry rated for 3,500+ cycles to 80% capacity. The 51.2V battery architecture and UPS function (8โ20ms switchover) make it suitable for sensitive electronics and home backup. The TT30-R RV outlet follows NEMA standards for safe 30A connections. Source: Pecron official US product page (manufacturer documentation).
Keep your Space Heater (1,500W) running with solar โข MPPT: 32โ 150V โข Max: 2400W
Smart Value 400W Panel
Adapter required: MC4 -> XT60.
Smart Value 400W Panel
Adapter required: MC4 -> XT60.
Yes. The Pecron E3600LFP provides 3600W running / 7000W surge. The Space Heater (1,500W) needs 1651W / 1651W (including 10% buffer). That leaves 1949W of running headroom and 5349W of surge margin.
Approximately 1.4 hours, based on the Space Heater (1,500W)'s 1500W draw and the Pecron E3600LFP's 3072Wh capacity (70% usable after real-world losses).
With 1015W allocated to the Space Heater (1,500W), the Pecron E3600LFP still has ~365W of margin. These devices could run simultaneously:
Power Tip: To get the most out of your Pecron E3600LFP, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the Space Heater (1,500W)
Ranked by budget, runtime, and overall compatibility.
Derived from variant list (max of variants). Running worst case = all three variants (1500W). Surge = running (resistive heating element โ no motor inrush).
Pecron E3600LFP Official Product Page (US) โ full specifications
Similar-output alternatives you can compare side by side.