1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
Yes, the Explorer 300 Plus can run a Garage Door Opener
Yes - Explorer 300 Plus has enough running and surge power for the Garage Door Opener (Residential). Target ~207W running / 311W surge; the generator provides 300W / 600W.
Power Margin Analysis
300W / 600W Capacity Running 93W headroom
207W required
Surge 289W headroom
311W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PASSContinuous draw with safety buffer applied.
207W required -> 300W available (93W headroom)
Required 207W required
Available 300W
3
Surge Gate
PASSStartup peak with safety buffer applied.
311W required -> 600W available (289W headroom)
Required 311W required
Available 600W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 1.1h
Device profile reference: up to 0.1h per day.
Power bars show required versus available output for each gate.
View full compatibility reportDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
300W
Running Power
🔋
288Wh
Capacity
⏱️
~1.1h
Est. Runtime
☀️
100W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 207W; generator provides 300W.
- 2 Surge headroom: target 311W; generator provides 600W.
- 3 Tip: leave headroom for startup spikes and warm conditions.
Model-Specific Results
3 of 3 models are SAFE or TIGHT. Most demanding model: LiftMaster 8500W Wall Mount (DC Motor, WiFi) (270W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| LiftMaster 8500 Wall Mount (DC Motor) | 120W | 180W | Safe | ~1.7h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 120W (1.0A at 120V AC). **Surge:** ~180W estimated (1.5× running). The 8500 uses a 24V DC motor with an electronic controller that ramps speed gradually — no hard inrush current like traditional AC universal motors. This is the lowest-draw wall-mount opener in the LiftMaster lineup. Field note: The 8500 is a jackshaft (side-mount) design that attaches to the torsion bar. It requires no ceiling clearance and works with high-lift or vertical-lift doors. The low 120W draw means virtually any power station with a working AC outlet can run it. Can a portable power station open my garage door during a power outage? Yes. The LiftMaster 8500 draws only 120W running with a brief 180W startup. Any power station rated 300W or above will handle it easily. A 500Wh station could open and close the door hundreds of times. | |||||
| LiftMaster 8500W Wall Mount (DC Motor, WiFi) | 180W | 270W | Safe | ~1.1h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 180W (1.5A at 120V AC). **Surge:** ~270W estimated (1.5× running). The 8500W adds integrated WiFi (myQ smart home) and LED lighting to the 8500 platform, increasing draw from 1.0A to 1.5A. Same 24V DC motor with electronic ramp-up — no hard inrush. Field note: The WiFi module requires continuous power to maintain myQ connectivity. On a power station, the opener will work mechanically but may lose smart features if the station enters sleep mode between uses. Disable station auto-sleep if you need remote monitoring. Will my LiftMaster smart opener work on a portable power station? Yes. The 8500W draws 180W running with 270W surge — well within any 500W+ power station. Note that the myQ WiFi features require the station to stay powered on (no auto-sleep) to maintain connectivity. | |||||
| LiftMaster 98022 Elite Wall Mount (DC Motor, Battery Backup) | 180W | 270W | Safe | ~1.1h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 180W (1.5A at 120V AC, motor only). **Surge:** ~270W estimated (1.5× running). The 98022 is LiftMaster's current-generation Elite wall mount with built-in battery backup, WiFi, and LED lighting. Same DC motor platform as the 8500W with updated electronics. The integrated battery backup means the opener works during grid outages without any external power source. Field note: The 98022's built-in battery backup makes it self-sufficient during outages — you may not need a power station for this opener at all. If you do use a power station, it charges the internal battery while also powering the motor. The LED lighting adds ~24W (0.2A) when on. Do I even need a power station for this garage door opener? Probably not. The 98022 has a built-in battery backup that handles up to 50 open/close cycles during outages. A power station is only useful for extended outages where the internal battery runs out, or to power other garage loads simultaneously. | |||||
How This Pairing Performs Across Our Database
This unit ranks #4 of 33 compatible generators for this device by buffered margin (Balanced class).
How Garage Door Opener (Residential) Performs Across 33 Tested Generators
33 of 33 generators are SAFE+TIGHT for Garage Door Opener (Residential).
33
Safe+Tight
Safe 32 (97%)
Tight 1 (3%)
Power Comparison: Jackery Explorer 300 Plus vs Top Alternatives for Garage Door Opener (Residential)
Jackery Explorer 300 Plus Safe Balanced
Current unit
Running 300W
Surge 600W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
Home Infrastructure
Garage Door Opener (Residential)
Vehicle Access
Select Your Model:
180W
Running
270W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +15% Running Power Usage 69% Utilization
207W required 300W Capacity
93W headroom
Surge/Startup Peak 52% Utilization
311W required 600W Capacity
289W headroom
Voltage Match 120V ↔ 120V ✓
Compare Similar Units
Free Tools
Station Tools
Generator Insights
Best for phones, laptops, and small essentials. Not suited for high-surge appliances.
LFP chemistry with a long 3,000-cycle rating for the class. USB-C solar input is limited to 100W.
Extend Runtime with Solar
Keep your Garage Door Opener (Residential) running with solar • MPPT: 12– 27V • Max: 100W
Smart Value EcoFlow
220W Panel
1 Hour Sun =
+0.9h per sun hour
MC4 -> Proprietary
Full in ~4.5h Voltage cap: 100W is difficult to reach safely. 2 panels in series would exceed cold-voltage limits. Safe series ~1 (≈92W).
Smart Value EcoFlow
160W Panel
1 Hour Sun =
+0.6h per sun hour
MC4 -> Proprietary
Full in ~4.4h Voltage cap: 100W is difficult to reach safely. 2 panels in series would exceed cold-voltage limits. Safe series ~1 (≈93W).
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running load: 120–180W depending on model (1.0–1.5A at 120V AC). Surge: 180–270W estimated (1.5× running). Modern residential garage door openers use DC motors with electronic speed controllers that ramp up gradually — surge is far lower than the 3× inrush of traditional AC universal motors. Wall-mount (jackshaft) models like the LiftMaster 8500 series are the most common DC motor openers.
Expected Behavior
Estimated runtime: ~1.1h. A single open-close cycle takes about 15 seconds of motor runtime. At typical residential use (3-4 cycles per day, ~0.1 hours), daily energy consumption is 12-18 Wh — negligible for any portable power station. The motor draws peak power only during door travel initiation.
Field Note
Traditional ceiling-mount AC motor openers (older Chamberlain, Genie chain-drive models) draw significantly more — typically 400-600W running with 3× motor surge. If you have an older AC motor opener, size your power station accordingly. The specs here represent modern DC motor wall-mount models, which are the only type with OEM-published electrical data.
Frequently Asked Questions
Can the Jackery Explorer 300 Plus power a Garage Door Opener?
Yes. The Jackery Explorer 300 Plus provides 300W running / 600W surge. The Garage Door Opener (Residential) needs 207W / 311W (including 15% buffer). That leaves 93W of running headroom and 289W of surge margin.
How long will the Explorer 300 Plus run a Garage Door Opener?
Approximately 1.1 hours, based on the Garage Door Opener (Residential)'s 180W draw and the Explorer 300 Plus's 288Wh capacity (70% usable after real-world losses).
What Else Can You Run?
With 55W allocated to the Garage Door Opener (Residential), the Explorer 300 Plus still has ~5W of margin. These devices could run simultaneously:
💡
LED Lamp
10W
📡
Wifi Router
15W
🖥️
24' Monitor
30W
Power Tip: To get the most out of your Explorer 300 Plus, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the Garage Door Opener (Residential)
Ranked by budget, runtime, and overall compatibility.
Technical Sourcing & Verification
ID: jackery-explorer-300-plus-garage-door-opener 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = LiftMaster 8500W / 98022 (180W). Surge worst case = LiftMaster 8500W / 98022 (270W). All variants are DC motor wall-mount openers with electronic speed controllers — surge estimated at 1.5× running (gradual ramp-up, no hard inrush).
⚡ Generator Specs Source
OEM Verified
Jackery Explorer 300 Plus User Manual (JE-300B)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.