Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
1 of 4 models are compatible with this generator.
Jump to model-specific results โSame decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
Device output type must match generator output.
120V required -> 120V available
Continuous draw with safety buffer applied.
1,629W to 2,112W required -> 1,500W available (129W to 612W short)
Startup peak with safety buffer applied.
1,629W to 2,112W required -> 3,000W available (888W to 1,371W headroom)
Runtime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 0.4h
Device profile reference: up to 0.5h per day.
Power bars show required versus available output for each gate.
View full compatibility reportQuick compatibility, required headroom, and model-specific context at a glance.
1 of 4 models are SAFE or TIGHT. Most demanding model: Whirlpool WMH31017HZ (Over-the-Range) (1,920W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Panasonic NN-SN67KS | 1,480W | 1,480W | Tight | ~0.5h | OEM Verified |
Show expert analysisTechnical: **Running load:** 1480 W continuous, no surge component. **Voltage requirement:** 120V AC. No surge margin needed since microwave magnetron presents constant resistive load during cook cycle. Field note: Generator must sustain 1480 W continuously for the full cook duration. Allow 200-300 W buffer to avoid voltage sag under sustained load. Can a 2000W inverter generator run this microwave? Only if your power source can supply at least 1480W continuous and 1480W surge at 120V. | |||||
| GE JVM3160RFSS (Over-the-Range) | 1,580W | 1,580W | Fail | โ | OEM Verified |
Show expert analysisTechnical: **Running load:** 1580 W. **Surge:** 1580 W. **Voltage:** 120V AC. No inrush current shown, meaning magnetron startup may still spike momentarily. Generator must deliver at least 1600 W continuous at 120V. Field note: Verify generator rated output matches or exceeds 1600 W continuous. Inverter models handle microwave loads more smoothly than older brushed designs. Will a 2000 W generator run this microwave? Only if your power source can supply at least 1580W continuous and 1580W surge at 120V. Confirm nameplate voltage and avoid overloading with simultaneous devices. | |||||
| Whirlpool WMH31017HZ (Over-the-Range) | 1,920W | 1,920W | Fail | โ | OEM Verified |
Show expert analysisTechnical: **Running load:** 1920 W. **Surge:** 1920 W. **Voltage:** 120V AC required. No surge multiplier observed, indicating resistive heating element without compressor or motor start transient. Generator must supply continuous 1920 W at 120V. Field note: Verify generator can sustain 1920 W continuously without derating. Heating appliances do not tolerate undervoltage. Confirm 120V output stability under full resistive load before connecting. Can I run this microwave on a 2000W generator? Only if your power source can supply at least 1920W continuous and 1920W surge at 120V. Verify the rated capacity accounts for altitude and temperature derating. | |||||
| Whirlpool WMH32519HW (Over-the-Range) | 1,920W | 1,920W | Fail | โ | OEM Verified |
Show expert analysisTechnical: **Running load:** 1920 W. **Surge:** 1920 W. **Voltage:** 120V AC. No surge multiplier indicates resistive heating element. Generator must sustain continuous 1920 W output without voltage sag. Field note: Confirm generator continuous rating exceeds 1920 W with margin. Voltage regulation critical for magnetron longevity under sustained draw. Can I run this microwave on a 2000-watt inverter generator? Only if your power source can supply at least 1920W continuous and 1920W surge at 120V. Verify nameplate continuous rating, not peak marketing claims. | |||||
This unit is outside the compatible set; 16 of 33 generators pass SAFE/TIGHT for this device.
16 of 33 generators are SAFE+TIGHT for Microwave Oven (1000W).
Fit class uses buffered needs (running and surge) for this device.
Quick Meal Prep
Select Your Model:
This load may exceed a standard 15A outlet. Verify your station has a higher-amperage outlet (20A/30A) before purchase.
Free Tools
This unit can handle typical compressor-based loads like refrigerators and window AC units where startup surge falls within the 3000W envelope. The 1070Wh capacity supports moderate runtime on continuous loads under 1500W. It can start most residential sump pumps and small well pumps where inrush demand does not exceed the rated surge threshold.
LFP chemistry provides a stable platform for managing high-current transients during motor startup events. The 3000W surge rating allows the unit to absorb brief inrush currents without shutdown, though users must verify compatibility with specific appliances. Source: Jackery Explorer 1000 v2 User Manual (Sept 2024) (manufacturer documentation).
Keep your Microwave Oven (1000W) running with solar โข MPPT: 16โ 60V โข Max: 400W
Official 200W Panel
Smart Value 200W Panel
Adapter required: MC4 -> DC8020.
Smart Value 200W Panel
Adapter required: MC4 -> DC8020.
It depends on the model. 1 of 4 Microwave Oven (1000W) models are compatible with the Jackery Explorer 1000 v2. See the model-specific results table for exact verdicts per model.
It depends on the model. Compatible models run approximately 0.5โ0.5 hours on the Explorer 1000 v2. 3 of 4 models are not compatible. See the model-specific results for details.
Efficiency Hack: Large appliances like the Microwave Oven (1000W) cycle on and off. To maximize the 0.4 hours of runtime, try to minimize how often you open the device or introduce heat loads.
Compare all 33 generators for the Microwave Oven (1000W)
Ranked by budget, runtime, and overall compatibility.
Derived from variant list (max of variants). Running worst case = Whirlpool WMH31017HZ (Over-the-Range) (1920W). Surge = running (resistive heating element โ no motor inrush).
Jackery Explorer 1000 v2 User Manual (Sept 2024)
Similar-output alternatives you can compare side by side.