1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
Yes, the RIVER 3 can run an Electric Blanket
This pairing clears the safety headroom. Required ~199W running and 199W surge; the RIVER 3 is rated 300W / 600W.
Power Margin Analysis
300W / 600W Capacity Running 101W headroom
199W required
Surge 401W headroom
199W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PASSContinuous draw with safety buffer applied.
199W required -> 300W available (101W headroom)
Required 199W required
Available 300W
3
Surge Gate
PASSStartup peak with safety buffer applied.
199W required -> 600W available (401W headroom)
Required 199W required
Available 600W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 1.0h
Device profile reference: up to 8h per day.
Power bars show required versus available output for each gate.
View full compatibility reportDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
300W
Running Power
🔋
245Wh
Capacity
⏱️
~1h
Est. Runtime
☀️
110W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 199W; generator provides 300W.
- 2 Surge headroom: target 199W; generator provides 600W.
- 3 Tip: leave headroom for startup spikes and warm conditions.
Model-Specific Results
5 of 5 models are SAFE or TIGHT. Most demanding model: Biddeford Electric Warming Blanket (Full) (180W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Biddeford Electric Warming Blanket (Full) | 180W | 180W | Safe | ~1.0h | OEM Verified |
Show expert analysisTechnical: **Running load:** 180 W. **Surge:** 180 W (resistive heating element, no inrush). **Voltage:** 120 V AC. A power station with at least 200 W continuous AC output and 120 V support is the minimum threshold. Field note: Verify the power station AC outlet provides 120 V. Resistive loads tolerate most inverter waveforms, but confirm the station's continuous rating exceeds 180 W. Can I run this blanket overnight on battery power? Only if your power source can supply at least 180W continuous and 180W surge at 120V. It depends on the power station's usable capacity. An 8-hour session requires at least 1440 Wh, so only stations rated above that threshold (accounting for inverter losses) will complete the full cycle. | |||||
| Westinghouse Heated Throw (50x60) | 100W | 100W | Safe | ~1.7h | OEM Verified |
Show expert analysisTechnical: **Running load:** 100W. **Surge:** 100W (resistive heating element). Requires 120V AC output from the power station. No surge spike present, as heating coils draw constant current. Field note: Verify your power station's inverter can sustain 100W for the full duration. Cold ambient temperatures may reduce battery capacity by 10-20%. Can I run this heated throw all night on a 500Wh power station? Only if your power source can supply at least 100W continuous and 100W surge at 120V. Only if you limit use to roughly 4-5 hours, accounting for inverter losses and reduced cold-weather battery performance. | |||||
| Sunbeam Microplush Ultimate Grey Heated Blanket (Queen) | 110W | 110W | Safe | ~1.6h | OEM Verified |
Show expert analysisTechnical: **Running load:** 110 W. **Surge:** 110 W (resistive heating, no inrush). **Voltage:** 120 V AC required. Draws constant wattage during active heating cycles. Field note: Verify power station AC outlet delivers stable 120 V under continuous 110 W load. Low wattage allows extended runtime on modest battery capacities. Can I run this heated blanket overnight on a portable power station? Only if your power source can supply at least 110W continuous and 110W surge at 120V. It depends on the power station's usable capacity and AC output rating. | |||||
| Sunbeam Brushed Fleece Heated Throw (Greystone) | 110W | 110W | Safe | ~1.6h | OEM Verified |
Show expert analysisTechnical: **Running load:** 110W. **Surge:** 110W. Requires 120V AC. Resistive heating element draws steady current with no inrush spike. Field note: Verify power station maintains 120V output under resistive load. Allow 15% inverter headroom for thermal stability. Can I run this heated throw all night on a portable power station? Only if your power source can supply at least 110W continuous and 110W surge at 120V. | |||||
| Sunbeam 2-in-1 Reversible Heated & Cooling Mattress Pad (Queen) | 110W | 110W | Safe | ~1.6h | OEM Verified |
Show expert analysisTechnical: **Running load:** 110 W continuous. **Surge:** 110 W (resistive heating element, no inrush). **Voltage:** 120 V AC required. Power station must supply stable 120 V AC output and deliver at least 110 W continuously for the duration of use. Field note: Verify power station capacity exceeds 880 Wh if running the full night. Thermal mattress pads draw steady power until thermostat cycles. Can I run this mattress pad through the night on a portable power station? Only if your power source can supply at least 110W continuous and 110W surge at 120V. Runtime depends on actual capacity and inverter efficiency. | |||||
How This Pairing Performs Across Our Database
This unit ranks #3 of 33 compatible generators for this device by buffered margin (Overkill class).
How Electric Blanket Performs Across 33 Tested Generators
33 of 33 generators are SAFE+TIGHT for Electric Blanket.
33
Safe+Tight
Safe 33 (100%)
Power Comparison: EcoFlow RIVER 3 vs Top Alternatives for Electric Blanket
EcoFlow RIVER 3 Safe Overkill
Current unit
Running 300W
Surge 600W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
Personal Care
Electric Blanket
Cold Night Warmth
Select Your Model:
Biddeford Electric Warming Blanket (Full)
180W / 180W
OEM Westinghouse Heated Throw (50x60)
100W / 100W
OEM Sunbeam Microplush Ultimate Grey Heated Blanket (Queen)
110W / 110W
OEM Sunbeam Brushed Fleece Heated Throw (Greystone)
110W / 110W
OEM Sunbeam 2-in-1 Reversible Heated & Cooling Mattress Pad (Queen)
110W / 110W
OEM 180W
Running
180W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +10% Running Power Usage 66% Utilization
199W required 300W Capacity
101W headroom
Surge/Startup Peak 33% Utilization
199W required 600W Capacity
401W headroom
Voltage Match 120V ↔ 120V ✓
Compare Similar Units
Free Tools
Station Tools
Generator Insights
The 600W surge rating can handle typical startup loads from small compressor-driven appliances like mini fridges and air tools. It can support motor-driven devices that require momentary inrush current during ignition. At 245Wh total capacity, expect limited runtime on continuous loads near the 300W ceiling.
LFP chemistry provides stable operation under load cycling. The unit accommodates brief inrush events up to 600W for equipment startup. Source: EcoFlow RIVER 3 User Manual v1.0 (manufacturer documentation).
Extend Runtime with Solar
Keep your Electric Blanket running with solar • MPPT: 11– 30V • Max: 110W
Official EcoFlow
110W Panel
1 Hour Sun =
+0.4h per sun hour
MC4 -> XT60i
Full in ~3.2h Adapter required: MC4 -> XT60i.
Smart Value Goal Zero
100W Panel
1 Hour Sun =
+0.4h per sun hour
Goal Zero proprietary -> XT60i adapter required
Full in ~3.5h Adapter required: Goal Zero proprietary -> XT60i adapter required.
Smart Value Jackery
100W Panel
1 Hour Sun =
+0.4h per sun hour
Jackery proprietary -> XT60i adapter required
Full in ~3.5h Adapter required: Jackery proprietary -> XT60i adapter required.
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running load: 180 W. Surge: 180 W (resistive heating element, no inrush). Requires 120V AC output from the power station. Draw remains constant during operation.
Expected Behavior
Estimated runtime: ~1h. Usage scenario assumes 8 hours per night, consuming approximately 1440 Wh daily. Continuous 180 W resistive load with no cycling or transient spikes.
Field Note
Verify the power station maintains stable 120V output under sustained resistive load. Capacity must exceed 1440 Wh for a full 8-hour session.
Frequently Asked Questions
Can the EcoFlow RIVER 3 power an Electric Blanket?
Yes. The EcoFlow RIVER 3 provides 300W running / 600W surge. The Electric Blanket needs 199W / 199W (including 10% buffer). That leaves 101W of running headroom and 401W of surge margin.
How long will the RIVER 3 run an Electric Blanket?
Approximately 1.0 hours, based on the Electric Blanket's 180W draw and the RIVER 3's 245Wh capacity (70% usable after real-world losses).
What Else Can You Run?
With 55W allocated to the Electric Blanket, the RIVER 3 still has ~5W of margin. These devices could run simultaneously:
💡
LED Lamp
10W
📡
Wifi Router
15W
🖥️
24' Monitor
30W
Power Tip: To get the most out of your RIVER 3, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the Electric Blanket
Ranked by budget, runtime, and overall compatibility.
Related Guides: How to Size a Power Station
Technical Sourcing & Verification
ID: ecoflow-river-3-electric-blanket 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = Biddeford Electric Warming Blanket (Full) (180W). Surge = running (resistive heating element — no motor inrush).
⚡ Generator Specs Source
OEM Verified
EcoFlow RIVER 3 User Manual (2024-09-11)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.