1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
Can the RIVER 2 Run an Electric Wheelchair Charger? It Depends on Your Model
2 of 3 models are compatible with this generator.
Jump to model-specific results ↓Power Margin Analysis
300W / 600W Capacity Running Up to 160W headroom on lighter models; 93W short on demanding models
140W to 393W required
Surge 207W to 460W headroom by model
140W to 393W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PARTIALContinuous draw with safety buffer applied.
140W to 393W required -> 300W available (160W headroom on lighter models)
Required 140W to 393W required
Available 300W
3
Surge Gate
PASSStartup peak with safety buffer applied.
140W to 393W required -> 600W available (207W to 460W headroom)
Required 140W to 393W required
Available 600W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 0.5h
Device profile reference: up to 8h per day.
Power bars show required versus available output for each gate.
View full compatibility reportDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
300W
Running Power
🔋
256Wh
Capacity
⏱️
~0.5h
Est. Runtime
☀️
110W
Solar Input
Quick Compatibility Check
- 1 2 of 3 models are compatible with the RIVER 2.
- 2 Model requirements range from 121W to 341W running watts.
- 3 See the model-specific results table for per-model verdicts.
Model-Specific Results
2 of 3 models are SAFE or TIGHT. Most demanding model: Permobil VoltPro (616270 / 616347) (341W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Pride / UPG 24BC3500L-1 (24V 3.5A Lithium) | 121W | 121W | Safe | ~1.5h | Engineering Est. |
Show expert analysisTechnical: **Running load:** ~121W AC estimated from 101W DC output (28.8V × 3.5A) at ~83% charger efficiency. **Surge:** ~121W (switch-mode charger, no inrush). **Voltage:** 120V AC (universal 100-240V input). This is a lithium-only charger for Go-Go Endurance scooters and Jazzy EVO Series 613 power chairs. Field note: This charger is lithium-only — do not connect to lead-acid batteries. At 121W it is the lightest load in the set and compatible with virtually any power station above 200W continuous output. Verify pure sine wave output for medical equipment. Can I charge a lithium wheelchair battery with a portable power station? Only if your power source can supply at least 121W continuous at 120V. Lithium wheelchair chargers draw less than lead-acid equivalents and are well-suited to portable power, but always maintain a backup source for medical mobility equipment. | |||||
| Pride / UPG 24BC5000T-4 (24V 5A) | 180W | 180W | Safe | ~1.0h | Engineering Est. |
Show expert analysisTechnical: **Running load:** ~180W AC estimated from 148W DC output (29.6V × 5.0A) at ~83% charger efficiency. **Surge:** ~180W (switch-mode charger, no inrush). **Voltage:** 120V AC (universal 100-240V input). Three-stage charge cycle with DOE-mandated 20-hour auto-cutoff. Field note: This is the most common charger size for standard power wheelchairs with Group 22NF or Group 24 lead-acid batteries. At 180W, a 1,500 Wh power station provides roughly 8 hours of charging — enough for a full overnight cycle. How long can a portable power station run this wheelchair charger? Only if your power source can supply at least 180W continuous at 120V. A 1,500 Wh power station provides approximately 8 hours at full draw, sufficient for a complete charge cycle on most standard wheelchair batteries. | |||||
| Permobil VoltPro (616270 / 616347) | 341W | 341W | Fail | — | OEM Manual |
Show expert analysisTechnical: **Running load:** 341W AC worst-case (300W max DC output at OEM minimum 88% efficiency). **Surge:** 341W (switch-mode charger, no inrush). **Voltage:** 120V AC only (110-126V tolerance range). This is a 10A charger designed for Permobil power wheelchairs with large battery banks (30-100 Ah at C₂₀ rate). Field note: The VoltPro is the highest-draw wheelchair charger in this comparison. Most mid-range power stations (under 500W continuous) can handle it, but the energy demand is substantial. For a full overnight charge during an outage, budget at least 2,500 Wh of usable station capacity. Why does the Permobil VoltPro draw so much more than other wheelchair chargers? Only if your power source can supply at least 341W continuous at 120V. The VoltPro is a 10A high-current charger designed for large power wheelchair batteries (up to 100 Ah). It charges faster but demands more from the power source than standard 3.5A or 5A chargers. | |||||
How This Pairing Performs Across Our Database
This unit is outside the compatible set; 29 of 33 generators pass SAFE/TIGHT for this device.
How Electric Wheelchair Charger Performs Across 33 Tested Generators
29 of 33 generators are SAFE+TIGHT for Electric Wheelchair Charger.
29
Safe+Tight
Safe 29 (88%)
Fail 4 (12%)
Power Comparison: EcoFlow RIVER 2 vs Top Alternatives for Electric Wheelchair Charger
EcoFlow RIVER 2 Fail
Current unit
Running 300W
Surge 600W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
Medical
Electric Wheelchair Charger
Daily Mobility Charging
Select Your Model:
341W
Running
341W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +15% Running Power Usage 47% to 131% Utilization
140W to 393W required 300W Capacity
Up to 160W headroom on lighter models; 93W short on demanding models
Surge/Startup Peak 23% to 66% Utilization
140W to 393W required 600W Capacity
207W to 460W headroom by model
Voltage Match 120V ↔ 120V ✓
Compare Similar Units
Free Tools
Station Tools
Generator Insights
The 600 W surge window can support typical compressor-based startup loads found in small refrigerators, window AC units, and sump pumps. The 256 Wh capacity limits sustained runtime, but the 2:1 surge-to-running ratio can handle brief inrush currents during motor startup events. This unit can manage intermittent high-demand appliances in portable or backup scenarios.
LFP chemistry provides stable operation across discharge cycles. The 300 W continuous rating with 600 W surge headroom allows brief high-draw events without immediate overload shutdown. Source: EcoFlow RIVER 2 User Manual v1.0 (OEM documentation).
Extend Runtime with Solar
Keep your Electric Wheelchair Charger running with solar • MPPT: 11– 30V • Max: 110W
Official EcoFlow
110W Panel
1 Hour Sun =
+0.2h per sun hour
MC4 -> XT60
Full in ~3.3h Adapter required: MC4 -> XT60.
Smart Value Goal Zero
100W Panel
1 Hour Sun =
+0.2h per sun hour
Goal Zero proprietary -> XT60 adapter required
Full in ~3.7h Adapter required: Goal Zero proprietary -> XT60 adapter required.
Smart Value Jackery
100W Panel
1 Hour Sun =
+0.2h per sun hour
Jackery proprietary -> XT60 adapter required
Full in ~3.7h Adapter required: Jackery proprietary -> XT60 adapter required.
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running range: 121W to 341W depending on charger amperage and battery chemistry. Surge: Equal to running watts (switch-mode chargers have no inrush). Voltage: 120V AC. Wheelchair chargers are steady-state loads with no cycling or surge events.
Expected Behavior
Estimated runtime: ~0.5h. Typical charging session is 8 hours overnight. Daily energy consumption ranges from 968 Wh (3.5A lithium) to 2,728 Wh (10A lead-acid). Actual draw tapers as batteries approach full charge, so real energy consumption is lower than worst-case estimates.
Field Note
Wheelchair chargers are medical devices — always maintain a backup power source. Pure sine wave output is recommended. Verify your power station can sustain the full charge duration without thermal shutdown. The charger amperage printed on the label is DC output current, not the AC draw from the wall.
Frequently Asked Questions
Can the EcoFlow RIVER 2 power an Electric Wheelchair Charger?
It depends on the model. 2 of 3 Electric Wheelchair Charger models are compatible with the EcoFlow RIVER 2. See the model-specific results table for exact verdicts per model.
How long will the RIVER 2 run an Electric Wheelchair Charger?
It depends on the model. Compatible models run approximately 1.0–1.5 hours on the RIVER 2. 1 of 3 models are not compatible. See the model-specific results for details.
Pro Tip for Medical Users: According to energy reports, turning off the humidifier on your Electric Wheelchair Charger can double your runtime. Using a DC cable instead of the AC plug is also recommended to avoid inverter inefficiency.
Compare all 33 generators for the Electric Wheelchair Charger
Ranked by budget, runtime, and overall compatibility.
Related Guides: How to Size a Power Station
Technical Sourcing & Verification
ID: ecoflow-river-2-electric-wheelchair-charger 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Worst case = Permobil VoltPro 616270/616347 (341W running, 341W surge).
⚡ Generator Specs Source
OEM Verified
EcoFlow RIVER 2 User Manual v1.0
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.