1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
Can the RIVER 2 Pro Run a Rice Cooker? It Depends on Your Model
1 of 3 models are compatible with this generator.
Jump to model-specific results ↓Power Margin Analysis
800W / 1600W Capacity Running Up to 414W headroom on lighter models; 236W short on demanding models
386W to 1036W required
Surge 564W to 1214W headroom by model
386W to 1036W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PARTIALContinuous draw with safety buffer applied.
386W to 1,036W required -> 800W available (414W headroom on lighter models)
Required 386W to 1,036W required
Available 800W
3
Surge Gate
PASSStartup peak with safety buffer applied.
386W to 1,036W required -> 1,600W available (564W to 1,214W headroom)
Required 386W to 1,036W required
Available 1,600W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 0.6h
Device profile reference: up to 0.5h per day.
Power bars show required versus available output for each gate.
View full compatibility reportDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
800W
Running Power
🔋
768Wh
Capacity
⏱️
~0.6h
Est. Runtime
☀️
220W
Solar Input
Quick Compatibility Check
- 1 1 of 3 models are compatible with the RIVER 2 Pro.
- 2 Model requirements range from 350W to 941W running watts.
- 3 See the model-specific results table for per-model verdicts.
Model-Specific Results
1 of 3 models are SAFE or TIGHT. Most demanding model: Tiger JBV-A18U (10-Cup Micom) (941W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Aroma ARC-914SBD (8-Cup Digital) | 350W | 350W | Safe | ~1.5h | OEM Verified |
Show expert analysisTechnical: **Running load:** 350 W. **Surge:** 350 W. Requires 120V AC output. Resistive heating element with no motor inrush. One of the lightest rice cooker loads available. Field note: At 350W this is one of the easiest kitchen appliances to run off-grid. Even a compact 300Wh power station can handle a full cook cycle. Can I run this Aroma rice cooker on a small portable power station? Yes — at 350W it works on any power station rated 500W+ continuous. A 500Wh battery handles multiple cook cycles. | |||||
| Zojirushi NS-TSC18 (10-Cup Micom) | 820W | 820W | Fail | — | OEM Manual |
Show expert analysisTechnical: **Running load:** 820 W. **Surge:** 820 W (no inrush spike). **Voltage:** 120 V AC required. Micom (microcomputer) fuzzy-logic heating draws more than basic rice cookers due to advanced temperature control. Field note: The 10-cup Zojirushi is a mid-range load. Power stations rated 1000W+ handle it with comfortable margin. The fuzzy logic cycling means average draw is below 820W over a full cook. Can I run this Zojirushi on a 500W power station? No — it draws 820W continuous. You need at least a 1000W-rated power station for safe operation. | |||||
| Tiger JBV-A18U (10-Cup Micom) | 941W | 941W | Fail | — | OEM Verified |
Show expert analysisTechnical: **Running load:** 941 W. **Surge:** 941 W. Requires 120V AC output. Micom-controlled heating with no motor inrush. The highest-draw standard rice cooker in this comparison. Field note: At 941W this is the heaviest standard rice cooker load. A 1200W power station handles it with margin. Don't confuse this with induction heating models (1300W+) which are a different class. Why does this Tiger draw more than a Zojirushi of the same size? Heating element wattage varies by design. The Tiger JBV-A18U uses a 941W element vs 820W for the Zojirushi NS-TSC18 — both are 10-cup micom cookers but with different heating configurations. | |||||
How This Pairing Performs Across Our Database
This unit is outside the compatible set; 25 of 33 generators pass SAFE/TIGHT for this device.
How Rice Cooker Performs Across 33 Tested Generators
25 of 33 generators are SAFE+TIGHT for Rice Cooker.
25
Safe+Tight
Safe 24 (73%)
Tight 1 (3%)
Fail 8 (24%)
Power Comparison: EcoFlow RIVER 2 Pro vs Top Alternatives for Rice Cooker
EcoFlow RIVER 2 Pro Fail
Current unit
Running 800W
Surge 1,600W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
Kitchen Appliances
Rice Cooker
Rice Preparation
Select Your Model:
941W
Running
941W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +10% Running Power Usage 48% to 130% Utilization
386W to 1036W required 800W Capacity
Up to 414W headroom on lighter models; 236W short on demanding models
Surge/Startup Peak 24% to 65% Utilization
386W to 1036W required 1600W Capacity
564W to 1214W headroom by model
Voltage Match 120V ↔ 120V ✓
Compare Similar Units
Free Tools
Station Tools
Generator Insights
The 1600W surge rating can handle typical motor startup events found in residential compressor-based appliances like refrigerators and well pumps. The 800W running capacity can support continuous loads such as home network equipment, lighting circuits, and small kitchen appliances. This configuration works well for targeted backup scenarios rather than whole-home replacement power.
This unit uses LFP chemistry, which offers stable thermal characteristics during discharge cycles. The 768Wh capacity supports extended runtime for moderate household loads. Source: EcoFlow RIVER 2 Pro User Manual v1.0 (manufacturer documentation).
Extend Runtime with Solar
Keep your Rice Cooker running with solar • MPPT: 11– 50V • Max: 220W
Official EcoFlow
220W Panel
1 Hour Sun =
+0.2h per sun hour
MC4 -> XT60i
Full in ~5h Adapter required: MC4 -> XT60i.
Smart Value Bluetti
200W Panel
1 Hour Sun =
+0.1h per sun hour
MC4 -> XT60i
Full in ~5.5h Adapter required: MC4 -> XT60i.
Smart Value BougeRV
200W Panel
1 Hour Sun =
+0.1h per sun hour
MC4 -> XT60i
Full in ~5.5h Adapter required: MC4 -> XT60i.
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running load: 941 W continuous (worst case). Surge: 941 W (resistive heating element, no motor start spike). Voltage: 120 V AC required. Rice cookers range from 350W (basic digital) to 941W (large micom) depending on size and technology.
Expected Behavior
Estimated runtime: ~0.6h. Load depends on model: budget 8-cup cookers draw 350W, premium 10-cup micom models draw 820-941W. Half-hour daily operation consumes 175-470 Wh. Load is steady with no inrush spike.
Field Note
Check your specific model before sizing a power station. A budget Aroma (350W) runs on almost anything, while a 10-cup Tiger or Zojirushi (820-941W) needs a 1000W+ station.
Frequently Asked Questions
Can the EcoFlow RIVER 2 Pro power a Rice Cooker?
It depends on the model. 1 of 3 Rice Cooker models are compatible with the EcoFlow RIVER 2 Pro. See the model-specific results table for exact verdicts per model.
How long will the RIVER 2 Pro run a Rice Cooker?
It depends on the model. Compatible models run approximately 1.5–1.5 hours on the RIVER 2 Pro. 2 of 3 models are not compatible. See the model-specific results for details.
Efficiency Hack: Large appliances like the Rice Cooker cycle on and off. To maximize the 0.6 hours of runtime, try to minimize how often you open the device or introduce heat loads.
Compare all 33 generators for the Rice Cooker
Ranked by budget, runtime, and overall compatibility.
Related Guides: How to Size a Power Station
Technical Sourcing & Verification
ID: ecoflow-river-2-pro-rice-cooker 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = Tiger JBV-A18U (941W). Surge = running (resistive heating element — no motor inrush).
⚡ Generator Specs Source
OEM Verified
EcoFlow RIVER 2 Pro User Manual v1.0
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.