1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V/240V available
Yes, the Delta Pro Ultra X can run a Shop Vac
This pairing clears the safety headroom. Required ~1601W running and 4803W surge; the Delta Pro Ultra X is rated 12000W / 24000W.
Power Margin Analysis
12000W / 24000W Capacity Running 10399W headroom
1601W required
Surge 19197W headroom
4803W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PASSContinuous draw with safety buffer applied.
1,601W required -> 12,000W available (10,399W headroom)
Required 1,601W required
Available 12,000W
3
Surge Gate
PASSStartup peak with safety buffer applied.
4,803W required -> 24,000W available (19,197W headroom)
Required 4,803W required
Available 24,000W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 3.1h
Device profile reference: up to 1h per day.
Power bars show required versus available output for each gate.
View full compatibility reportDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
12000W
Running Power
🔋
6144Wh
Capacity
⏱️
~3.1h
Est. Runtime
☀️
10000W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 1601W; generator provides 12000W.
- 2 Surge headroom: target 4803W; generator provides 24000W.
- 3 Tip: leave headroom for startup spikes and warm conditions.
Model-Specific Results
3 of 3 models are SAFE or TIGHT. Most demanding model: Shop-Vac SVX2 (12-Gal, 5.5 HP Peak) (4,176W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| DeWalt DXV10P (10-Gal, 5.5 HP, 2-Stage Quiet) | 1,200W | 3,600W | Safe | ~3.6h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 1200W from OEM nameplate (10A × 120V). **Estimated startup surge:** 3600W at 3x running (motor-load multiplier — no OEM starting watts published). **Voltage:** 120V AC. 2-stage motor, 90 CFM airflow, 73 dB noise rating — quietest in this set. Field note: The DXV10P is the most power-station-friendly shop vac in this set. At 1200W running and an estimated 3600W surge, it works with most power stations rated 2000W+ with adequate surge capacity. The 2-stage motor runs quieter (73 dB) and may have lower actual inrush than single-stage models, though no OEM data confirms this. Can a portable power station run the DeWalt DXV10P? Only if your power source can supply at least 1200W continuous and approximately 3600W surge at 120V. The motor startup surge is the main challenge, not the running watts. | |||||
| Vacmaster Beast VFB511B (5-Gal, 6 HP Peak, Compact) | 1,320W | 3,960W | Safe | ~3.3h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 1320W from OEM specs (11A × 120V). **Estimated startup surge:** 3960W at 3x running (motor-load multiplier — no OEM starting watts published). **Voltage:** 120V AC. Single-stage motor, 102 CFM airflow, 320 Air Watts, 82 in. water lift. Field note: The Beast packs the most suction power per pound in this set — 102 CFM from a 12 lb unit. At 1320W running it draws 10% more than the DeWalt but delivers 13% more airflow. The compact 5-gallon tank makes it portable but limits continuous use on large jobs. Is the Vacmaster Beast harder to run on a power station than the DeWalt? Slightly — 1320W versus 1200W running, with an estimated 3960W versus 3600W surge. Both need a power station with at least 2000W continuous and 4000W+ surge for reliable startup. | |||||
| Shop-Vac SVX2 (12-Gal, 5.5 HP Peak) | 1,392W | 4,176W | Safe | ~3.1h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 1392W from OEM specs (11.6A × 120V). **Estimated startup surge:** 4176W at 3x running (motor-load multiplier — no OEM starting watts published). **Voltage:** 120V AC. SVX2 motor, 12-gallon tank — the highest-draw unit in this set. Field note: The SVX2 draws the most power in this set at 11.6A. Its estimated 4176W startup surge puts it beyond most mid-range power stations. If you need a shop vac specifically for portable power use, the 10A DeWalt is a safer choice. The SVX2 is best paired with stations rated 2500W+ continuous with 5000W surge. Why does the Shop-Vac draw more than the 6 HP Vacmaster? Peak HP is a marketing metric, not an electrical measurement. The SVX2 at 11.6A draws more real power than the 6 HP Beast at 11A. Always check nameplate amps, not HP ratings, for power station sizing. | |||||
How This Pairing Performs Across Our Database
This unit ranks #12 of 12 compatible generators for this device by buffered margin (Overkill class).
How Shop Vac (Wet/Dry, 5-6 HP Peak) Performs Across 33 Tested Generators
12 of 33 generators are SAFE+TIGHT for Shop Vac (Wet/Dry, 5-6 HP Peak).
12
Safe+Tight
Safe 9 (27%)
Tight 3 (9%)
Fail 21 (64%)
Power Comparison: EcoFlow Delta Pro Ultra X vs Top Alternatives for Shop Vac (Wet/Dry, 5-6 HP Peak)
EcoFlow Delta Pro Ultra X Safe Overkill
Current unit
Running 12,000W
Surge 24,000W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
Power Tools
Shop Vac (Wet/Dry, 5-6 HP Peak)
Workshop Cleanup
Select Your Model:
1392W
Running
4176W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +15% Running Power Usage 13% Utilization
1601W required 12000W Capacity
10399W headroom
Surge/Startup Peak 20% Utilization
4803W required 24000W Capacity
19197W headroom
Voltage Match 120V ↔ 120V/240V ✓
Free Tools
Station Tools
Generator Insights
With 24,000W surge capacity, this system can handle typical compressor startup events found in central air conditioners, well pumps, and refrigeration equipment. The 12,000W continuous rating supports sustained high-load operation across multiple circuits. At 6,144Wh usable capacity, runtime depends on connected load, but this configuration can support whole-home essentials during extended outages.
This unit uses LFP chemistry, a formulation widely recognized for thermal stability in residential backup applications. The manufacturer provides operational guidelines in their documentation, and users should follow all installation and grounding instructions. Source: EcoFlow DELTA Pro Ultra X User Manual (manufacturer documentation).
Extend Runtime with Solar
Keep your Shop Vac (Wet/Dry, 5-6 HP Peak) running with solar • MPPT: 80– 500V • Max: 10000W
Official EcoFlow
400W Panel
1 Hour Sun =
+0.2h per sun hour
Amp Limited
Full in ~11h Requires 2 panels in series to reach the 80V start threshold.
Smart Value Anker
400W Panel
1 Hour Sun =
+0.2h per sun hour
Amp Limited
Full in ~11h Requires 2 panels in series to reach the 80V start threshold.
Smart Value Bluetti
350W Panel
1 Hour Sun =
+0.2h per sun hour
Amp Limited
Full in ~8.4h Requires 3 panels in series to reach the 80V start threshold.
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running range: 1200W (10A) to 1392W (11.6A) depending on motor size. Estimated surge range: 3600W to 4176W at 3x running (motor-load multiplier — no shop vac manufacturer publishes starting watts). Voltage: 120V AC for all residential models.
Expected Behavior
Estimated runtime: ~3.1h. Shop vacs draw near-maximum rated power continuously while running. Unlike power tools that cycle between cuts, a shop vac runs steady until you release the trigger or switch. At 1 hour daily use, energy consumption ranges from 1200 to 1392 Wh.
Field Note
Peak HP is meaningless for power station sizing — a '6 HP' vac may draw less amps than a '5.5 HP' model. Always check the nameplate amperage. Motor startup surge is the primary compatibility concern: a shop vac that draws 1200W running may need 3600W briefly at startup. Size for surge capacity first.
Frequently Asked Questions
Can the EcoFlow Delta Pro Ultra X power a Shop Vac?
Yes. The EcoFlow Delta Pro Ultra X provides 12000W running / 24000W surge. The Shop Vac (Wet/Dry, 5-6 HP Peak) needs 1601W / 4803W (including 15% buffer). That leaves 10399W of running headroom and 19197W of surge margin.
How long will the Delta Pro Ultra X run a Shop Vac?
Approximately 3.1 hours, based on the Shop Vac (Wet/Dry, 5-6 HP Peak)'s 1392W draw and the Delta Pro Ultra X's 6144Wh capacity (70% usable after real-world losses).
What Else Can You Run?
With 1020W allocated to the Shop Vac (Wet/Dry, 5-6 HP Peak), the Delta Pro Ultra X still has ~7188W of margin. These devices could run simultaneously:
🔥
Space Heater (Eco)
750W
💡
LED Lamp
10W
📺
55' LED TV
80W
🌀
Box Fan (Medium)
60W
❄️
Medical Fridge
80W
🩺
CPAP (No Humidifier)
40W
Power Tip: To get the most out of your Delta Pro Ultra X, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the Shop Vac (Wet/Dry, 5-6 HP Peak)
Ranked by budget, runtime, and overall compatibility.
Technical Sourcing & Verification
ID: ecoflow-delta-pro-ultra-x-shop-vac-5hp 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = Shop-Vac SVX2 (1392W at 11.6A). Surge worst case = Shop-Vac SVX2 (4176W). Surge estimated using 3x motor-load multiplier policy (no OEM starting watts published for any shop vac in this class).
⚡ Generator Specs Source
OEM Verified
EcoFlow DELTA Pro Ultra X User Manual
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.