Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V/240V available
This pairing clears the safety headroom. Required ~1871W running and 1871W surge; the Delta Pro Ultra X is rated 12000W / 24000W.
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
Device output type must match generator output.
120V required -> 120V/240V available
Continuous draw with safety buffer applied.
1,871W required -> 12,000W available (10,129W headroom)
Startup peak with safety buffer applied.
1,871W required -> 24,000W available (22,129W headroom)
Runtime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 2.5h
Device profile reference: up to 0.3h per day.
Power bars show required versus available output for each gate.
View full compatibility reportQuick compatibility, required headroom, and model-specific context at a glance.
4 of 4 models are SAFE or TIGHT. Most demanding model: Dyson Supersonic r Professional (1,700W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Dyson Supersonic Origin | 1,600W | 1,600W | Safe | ~2.7h | OEM Verified |
Show expert analysisTechnical: **Running load:** 1600 W. **Surge:** 1600 W. Requires 120V AC. No surge multiplier indicates resistive heating element. Generator must supply at least 1600 W continuous at 120V to operate safely. Field note: Verify generator can sustain 1600 W before connecting. Allow 20% headroom above rated load for stable operation during peak heat cycles. Will this work on a 2000W generator? Only if your power source can supply at least 1600W continuous and 1600W surge at 120V. Check manufacturer load charts for real-world capacity under resistive heating. | |||||
| Dyson Supersonic r Professional | 1,700W | 1,700W | Safe | ~2.5h | OEM Verified |
Show expert analysisTechnical: **Running load:** 1700 W. **Surge:** 1700 W (resistive heating element, no motor spike). Requires 120V AC supply. Generator must sustain 1700 W continuously without voltage sag during the 18-minute runtime window. Field note: Verify generator can deliver full rated wattage at 120V under load. Undersized units may experience voltage drop during simultaneous appliance operation, causing thermal cutoff. Can I run this hair dryer on a 2000W inverter generator? Only if your power source can supply at least 1700W continuous and 1700W surge at 120V. Inverter generators often derate at altitude or high ambient temperature. | |||||
| Shark FlexStyle HD400 (1400W) | 1,400W | 1,400W | Safe | ~3.1h | OEM Verified |
Show expert analysisTechnical: **Running load:** 1400 W. **Surge:** 1400 W. Requires 120V AC supply. Resistive heating element yields identical running and surge demand. Generator must sustain continuous 1400 W output without voltage sag. Field note: Verify generator nameplate capacity exceeds 1400 W continuous. Voltage droop under load may reduce heating performance or trigger thermal shutdown. Can I run this styling tool on a 1500W portable generator? Only if your power source can supply at least 1400W continuous and 1400W surge at 120V. Marginal headroom increases risk of voltage sag and premature shutoff. | |||||
| Shark FlexStyle HD400 (1600W) | 1,600W | 1,600W | Safe | ~2.7h | OEM Verified |
Show expert analysisTechnical: **Running load:** 1600 W. **Surge load:** 1600 W. Requires 120V AC. Generator must supply continuous 1600 W minimum with no margin. Resistive heating element shows minimal inrush current. Field note: Zero headroom exists at 1600 W generator capacity. Any voltage sag or shared load will cause dropout. Verify available AC output rating before connecting. Can I run this on a 1600W generator? Only if your power source can supply at least 1600W continuous and 1600W surge at 120V. Any headroom deficit or shared circuit will interrupt operation. | |||||
This unit ranks #21 of 21 compatible generators for this device by buffered margin (Overkill class).
21 of 33 generators are SAFE+TIGHT for Professional Hair Dryer.
Fit class uses buffered needs (running and surge) for this device.
Morning Routine
Select Your Model:
Free Tools
With 24,000W surge capacity, this system can handle typical compressor startup events found in central air conditioners, well pumps, and refrigeration equipment. The 12,000W continuous rating supports sustained high-load operation across multiple circuits. At 6,144Wh usable capacity, runtime depends on connected load, but this configuration can support whole-home essentials during extended outages.
This unit uses LFP chemistry, a formulation widely recognized for thermal stability in residential backup applications. The manufacturer provides operational guidelines in their documentation, and users should follow all installation and grounding instructions. Source: EcoFlow DELTA Pro Ultra X User Manual (manufacturer documentation).
Keep your Professional Hair Dryer running with solar โข MPPT: 80โ 500V โข Max: 10000W
Official 400W Panel
Requires 2 panels in series to reach the 80V start threshold.
Smart Value 400W Panel
Requires 2 panels in series to reach the 80V start threshold.
Smart Value 350W Panel
Requires 3 panels in series to reach the 80V start threshold.
Yes. The EcoFlow Delta Pro Ultra X provides 12000W running / 24000W surge. The Professional Hair Dryer needs 1871W / 1871W (including 10% buffer). That leaves 10129W of running headroom and 22129W of surge margin.
Approximately 2.5 hours, based on the Professional Hair Dryer's 1700W draw and the Delta Pro Ultra X's 6144Wh capacity (70% usable after real-world losses).
With 1715W allocated to the Professional Hair Dryer, the Delta Pro Ultra X still has ~6185W of margin. These devices could run simultaneously:
Power Tip: To get the most out of your Delta Pro Ultra X, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the Professional Hair Dryer
Ranked by budget, runtime, and overall compatibility.
Derived from variant list (max of variants). Running worst case = Dyson Supersonic r Professional (1700W). Surge = running (resistive heating element โ no motor inrush).
EcoFlow DELTA Pro Ultra X User Manual
Similar-output alternatives you can compare side by side.