Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
This pairing clears the safety headroom. Required ~1651W running and 1651W surge; the DELTA 2 Max is rated 2400W / 4800W.
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
Device output type must match generator output.
120V required -> 120V available
Continuous draw with safety buffer applied.
1,651W required -> 2,400W available (749W headroom)
Startup peak with safety buffer applied.
1,651W required -> 4,800W available (3,149W headroom)
Runtime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 1.0h
Device profile reference: up to 0.2h per day.
Power bars show required versus available output for each gate.
View full compatibility reportQuick compatibility, required headroom, and model-specific context at a glance.
3 of 3 models are SAFE or TIGHT. Most demanding model: Cosori Speed-Boil CO171-GK2 (1.7L, 1500W, Glass) (1,500W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Fellow Stagg EKG Pro (0.9L, 1200W, Gooseneck) | 1,200W | 1,200W | Safe | ~1.2h | OEM Verified |
Show expert analysisTechnical: **Running load:** 1200W. **Surge:** 1200W (resistive โ no inrush). **Voltage:** 120V AC. Precision gooseneck pour-over kettle with variable temperature control. Smaller 0.9L capacity and lower wattage than standard kettles. Field note: The EKG Pro is the most generator-friendly kettle in this set at 1200W. With the 1.10x resistive buffer, a station needs at least 1320W continuous for a SAFE verdict. Stations rated 1200-1300W will show as TIGHT โ usable but no headroom. Can I run the Fellow Stagg EKG Pro on a 1500W power station? Only if your power source can supply at least 1200W continuous at 120V. A 1500W station handles this comfortably with 300W of headroom. | |||||
| Cosori Speed-Boil CO171-GK2 (1.7L, 1500W, Glass) | 1,500W | 1,500W | Safe | ~1.0h | OEM Verified |
Show expert analysisTechnical: **Running load:** 1500W. **Surge:** 1500W (resistive โ no inrush). **Voltage:** 120V AC. Glass body with blue LED, 1.7L capacity. Draws the maximum wattage a standard US 15A outlet allows. Field note: The #1 selling kettle on Amazon US. At 1500W, a station rated exactly 1500W shows TIGHT โ the 1.10x resistive buffer pushes the effective requirement to 1650W. Fill only what you need: boiling 0.5L instead of 1.7L cuts energy per cycle by 70% and reduces time at peak draw. Can I run the Cosori kettle on a 1500W power station? Only if your power source can supply at least 1500W continuous at 120V. A 1500W-rated station will show as TIGHT โ it works at raw spec but has zero headroom. | |||||
| Ninja KT200 Precision Temperature (1.7L, 1500W, Variable Temp) | 1,500W | 1,500W | Safe | ~1.0h | OEM Verified |
Show expert analysisTechnical: **Running load:** 1500W. **Surge:** 1500W (resistive โ no inrush). **Voltage:** 120V AC. Features 7 preset temperature settings with hold-temp function. Despite variable temperature presets, the heating element fires at full 1500W regardless of target temperature. Field note: The KT200 is a common misconception trap: users assume lower temperature settings draw less power. They don't โ the element is either fully on (1500W) or off. The only difference is cycle time. For generator sizing, always use 1500W regardless of the selected temperature preset. Does the Ninja KT200 draw less power on lower temperature settings? No. The heating element fires at full 1500W regardless of temperature setting. Lower settings just heat for a shorter duration. Your power station must handle 1500W continuous at 120V. | |||||
This unit ranks #13 of 23 compatible generators for this device by buffered margin (Overkill class).
23 of 33 generators are SAFE+TIGHT for Electric Water Kettle.
Fit class uses buffered needs (running and surge) for this device.
Hot Water On Demand
Select Your Model:
Free Tools
The 4800 W surge can support typical startup loads for refrigerators, well pumps, and air compressor motors that require momentary inrush current. The 2048 Wh capacity provides extended runtime for moderate continuous loads. This configuration can handle brief motor starts while sustaining steady power delivery for home backup scenarios.
This unit uses LFP chemistry, which offers a different thermal profile than older lithium chemistries. The manufacturer provides operational guidelines in their documentation. Source: EcoFlow DELTA 2 Max User Manual v1.0 (manufacturer documentation). Follow all usage instructions to maintain safe operation.
Keep your Electric Water Kettle running with solar โข MPPT: 11โ 60V โข Max: 1000W
Official 400W Panel
Adapter required: MC4 -> XT60i.
Smart Value 350W Panel
Adapter required: MC4 -> XT60i.
Smart Value 200W Panel
Adapter required: MC4 -> XT60i.
Yes. The EcoFlow DELTA 2 Max provides 2400W running / 4800W surge. The Electric Water Kettle needs 1651W / 1651W (including 10% buffer). That leaves 749W of running headroom and 3149W of surge margin.
Approximately 1.0 hours, based on the Electric Water Kettle's 1500W draw and the DELTA 2 Max's 2048Wh capacity (70% usable after real-world losses).
With 405W allocated to the Electric Water Kettle, the DELTA 2 Max still has ~15W of margin. These devices could run simultaneously:
Efficiency Hack: Large appliances like the Electric Water Kettle cycle on and off. To maximize the 1.0 hours of runtime, try to minimize how often you open the device or introduce heat loads.
Compare all 33 generators for the Electric Water Kettle
Ranked by budget, runtime, and overall compatibility.
Derived from variant list (max of variants). Running worst case = Cosori CO171-GK2 / Ninja KT200 (1500W). Surge = running (resistive heating element โ no motor inrush).
EcoFlow DELTA 2 Max User Manual v1.0
Similar-output alternatives you can compare side by side.