Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
Note: You are viewing specs for the original DELTA (Gen 1)
This legacy model has been officially replaced by a newer version with improved specs.
This pairing clears the safety headroom. Required ~230W running and 230W surge; the DELTA (Gen 1) is rated 1800W / 3300W.
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
Device output type must match generator output.
120V required -> 120V available
Continuous draw with safety buffer applied.
230W required -> 1,800W available (1,570W headroom)
Startup peak with safety buffer applied.
230W required -> 3,300W available (3,070W headroom)
Runtime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 4.4h
Device profile reference: up to 3h per day.
Power bars show required versus available output for each gate.
View full compatibility reportQuick compatibility, required headroom, and model-specific context at a glance.
3 of 3 models are SAFE or TIGHT. Most demanding model: JMGO N1S 4K (200W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Anker Nebula Mars 3 | 150W | 150W | Safe | ~5.9h | OEM Manual |
Show expert analysisTechnical: Running load is 150W from the OEM specifications section. This is a high-output portable projector profile and should be treated as a continuous electronic load. Field note: Use AC output for compatibility checks. This model includes an internal battery, which can extend total session time in real use. Can a portable power station run a portable projector for movie night? Yes. This device profile is 200W at 120V with low startup surge, so any compatible power station must first clear that power threshold; battery capacity then determines how long your movie session lasts. | |||||
| JMGO N1S 4K | 200W | 200W | Safe | ~4.4h | Engineering Est. |
Show expert analysisTechnical: The manual provides input current and voltage range but not a direct consumption number. 200W is a conservative worst-case estimate derived from the OEM input rating. Field note: If a detailed model spec sheet with direct power consumption becomes available, this variant should be updated from estimated to direct OEM watts. Can a portable power station run a portable projector for movie night? Yes. This device profile is 200W at 120V with low startup surge, so any compatible power station must first clear that power threshold; battery capacity then determines how long your movie session lasts. | |||||
| Samsung The Freestyle Gen 2 (SP-LFF3CLAX) | 50W | 50W | Safe | ~17.6h | Engineering Est. |
Show expert analysisTechnical: This model is USB-C power capable. The OEM guide explicitly requires a PD source with single-port output of at least 50W. Field note: When available, use a 60W+ USB-C PD port on the power station to avoid unnecessary inverter conversion losses. Can a portable power station run a portable projector for movie night? Yes. This device profile is 200W at 120V with low startup surge, so any compatible power station must first clear that power threshold; battery capacity then determines how long your movie session lasts. | |||||
This unit ranks #16 of 33 compatible generators for this device by buffered margin (Overkill class).
33 of 33 generators are SAFE+TIGHT for Portable Projector.
Fit class uses buffered needs (running and surge) for this device.
Outdoor Movie Night
Select Your Model:
Free Tools
The 3300W surge capacity can handle typical startup demands from refrigerators, well pumps, and other motor-driven appliances that require brief inrush current. The 1800W continuous rating supports sustained loads like power tools, kitchen appliances, and electronics. Understand that this is a legacy unit no longer in active production.
This legacy model uses NMC lithium chemistry in a 1260Wh battery pack. The manufacturer documentation outlines operational guidelines and user precautions for safe charging and discharging cycles. Source: EcoFlow DELTA 1300 User Manual (manufacturer documentation). This model has been discontinued and replaced by newer generations.
Keep your Portable Projector running with solar โข MPPT: 10โ 65V โข Max: 400W
Official 400W Panel
Adapter required: MC4 -> XT60.
Smart Value 350W Panel
Adapter required: MC4 -> XT60.
Smart Value 200W Panel
Adapter required: MC4 -> XT60.
Yes. The EcoFlow DELTA (Gen 1) provides 1800W running / 3300W surge. The Portable Projector needs 230W / 230W (including 15% buffer). That leaves 1570W of running headroom and 3070W of surge margin.
Approximately 4.4 hours, based on the Portable Projector's 200W draw and the DELTA (Gen 1)'s 1260Wh capacity (70% usable after real-world losses).
With 980W allocated to the Portable Projector, the DELTA (Gen 1) still has ~260W of margin. These devices could run simultaneously:
Power Tip: To get the most out of your DELTA (Gen 1), keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the Portable Projector
Ranked by budget, runtime, and overall compatibility.
Derived from variant list (max of variants). Running worst case = JMGO N1S 4K (200W from OEM manual input rating AC 100-240V 50/60Hz 2.0A, using 100V*2.0A worst-case). Surge worst case = JMGO N1S 4K (200W, electronic load with no motor inrush).
EcoFlow DELTA 1300 User Manual (V1.0)
Similar-output alternatives you can compare side by side.