1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V/240V available
Yes, the Anker SOLIX F3800 can run a Washing Machine
Yes - Anker SOLIX F3800 has enough running and surge power for the Washing Machine. Target ~1491W running / 1491W surge; the generator provides 6000W / 9000W.
Power Margin Analysis
6000W / 9000W Capacity Running 4509W headroom
1491W required
Surge 7509W headroom
1491W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PASSContinuous draw with safety buffer applied.
1,491W required -> 6,000W available (4,509W headroom)
Required 1,491W required
Available 6,000W
3
Surge Gate
PASSStartup peak with safety buffer applied.
1,491W required -> 9,000W available (7,509W headroom)
Required 1,491W required
Available 9,000W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 2.1h
Device profile reference: up to 1h per day.
Power bars show required versus available output for each gate.
View full compatibility reportDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
6000W
Running Power
🔋
3840Wh
Capacity
⏱️
~2.1h
Est. Runtime
☀️
2400W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 1491W; generator provides 6000W.
- 2 Surge headroom: target 1491W; generator provides 9000W.
- 3 Tip: leave headroom for startup spikes and warm conditions.
Model-Specific Results
3 of 3 models are SAFE or TIGHT. Most demanding model: Whirlpool WTW8127LC (Top Load, 10.8A, 2-in-1 Agitator) (1,296W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| LG WM4000HWA (Front Load, 10A, Inverter Direct Drive) | 1,200W | 1,200W | Safe | ~2.2h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 1200W from OEM specs (10A × 120V). **Surge:** 1200W modeled (no OEM startup current published — inverter direct drive uses electronic ramp-up with minimal inrush). **Voltage:** 120V AC. Front-load design with inverter direct drive motor (no belt), TurboWash 360. Field note: The WM4000HWA is the most power-station-friendly washer in this set. Front-load design uses less water than top-load, and the inverter motor starts smoothly without a power spike. For maximum battery life, use cold wash cycles — the internal heater is what drives the 10A peak draw. Can a portable power station run the LG WM4000HWA? Only if your power source can supply at least 1200W continuous at 120V. The inverter motor has no significant startup surge. Cold wash cycles draw less than the 1200W maximum. | |||||
| Whirlpool WTW8127LC (Top Load, 10.8A, 2-in-1 Agitator) | 1,296W | 1,296W | Safe | ~2.1h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 1296W from OEM Dimension Guide (max amp draw 10.8A × 120V). **Surge:** 1296W modeled (no OEM startup current published). **Voltage:** 120V AC. Top-load design with 2-in-1 removable agitator, 5.2-5.3 cu. ft. capacity. Note: the 15A circuit requirement is the minimum breaker size, not the appliance draw. Field note: The WTW8127LC is Whirlpool's current best-seller with the innovative 2-in-1 removable agitator. At 10.8A max draw it needs a power station rated for at least 1296W continuous. The OEM Dimension Guide clearly distinguishes 15A circuit requirement from 10.8A actual draw — a common source of confusion when sizing generators. Does the Whirlpool WTW8127LC really draw 15 amps? No — 15A is the minimum circuit breaker size, not the actual draw. The OEM Dimension Guide lists max amp draw at 10.8A (1296W). This distinction matters when sizing a power station. | |||||
| Maytag MVW7232HW (Top Load, 10.8A, Extra Power) | 1,296W | 1,296W | Safe | ~2.1h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 1296W from OEM Dimension Guide (max amp draw 10.8A × 120V). **Surge:** 1296W modeled (no OEM startup current published). **Voltage:** 120V AC. Top-load design with Extra Power button for stain pretreatment, deep fill option. Note: the 15A circuit requirement is the minimum breaker size, not the appliance draw. Field note: The MVW7232HW is Maytag's popular mid-range top-loader, built on the same Whirlpool Corp platform as the WTW8127LC. At 10.8A max draw it's electrically identical to the Whirlpool — the differences are in wash features (Extra Power stain pretreat) and brand positioning (Maytag = durability focus). Is the Maytag harder to run on a power station than the Whirlpool? No — both draw 10.8A (1296W) maximum. They share the same Whirlpool Corp motor platform. Any power source that runs one will run the other. | |||||
How This Pairing Performs Across Our Database
This unit ranks #21 of 23 compatible generators for this device by buffered margin (Overkill class).
How Washing Machine Performs Across 33 Tested Generators
23 of 33 generators are SAFE+TIGHT for Washing Machine.
23
Safe+Tight
Safe 23 (70%)
Fail 10 (30%)
Power Comparison: Anker SOLIX F3800 vs Top Alternatives for Washing Machine
Anker SOLIX F3800 Safe Overkill
Current unit
Running 6,000W
Surge 9,000W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
Large Appliances
Washing Machine
Laundry Day
Select Your Model:
1296W
Running
1296W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +15% Running Power Usage 25% Utilization
1491W required 6000W Capacity
4509W headroom
Surge/Startup Peak 17% Utilization
1491W required 9000W Capacity
7509W headroom
Voltage Match 120V ↔ 120V/240V ✓
Compare Similar Units
Free Tools
Station Tools
Generator Insights
The 9000W surge rating can handle typical compressor-based appliances like central air conditioners, well pumps, and refrigerators during startup. This capacity can support multiple simultaneous high-draw devices once running loads stabilize. Expect reliable operation for tools, HVAC systems, and other inductive loads that demand short-duration power spikes.
This unit employs LFP chemistry with a 3840Wh capacity, designed for stable discharge under high-demand conditions. The architecture supports both sustained and transient loads within rated limits. Source: Anker SOLIX F3800 User Manual v1.1 (Specifications) (OEM documentation).
Extend Runtime with Solar
Keep your Washing Machine running with solar • MPPT: 11– 60V • Max: 2400W
Official Anker
100W Panel
1 Hour Sun =
+0.1h per sun hour
MC4 -> XT60
Full in ~54.9h Adapter required: MC4 -> XT60.
Smart Value EcoFlow
400W Panel
1 Hour Sun =
+0.2h per sun hour
MC4 -> XT60
Full in ~13.7h Adapter required: MC4 -> XT60.
Smart Value EcoFlow
400W Panel
1 Hour Sun =
+0.2h per sun hour
MC4 -> XT60
Full in ~13.7h Adapter required: MC4 -> XT60.
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running range: 1200W (10A front-load) to 1296W (10.8A top-load) depending on design. Surge: modeled equal to running watts (no OEM startup current published for any model — modern washers use electronically controlled motors with minimal inrush). Voltage: 120V AC for all US residential models.
Expected Behavior
Estimated runtime: ~2.1h. Washing machines cycle through fill, wash, rinse, and spin phases over 30-60 minutes. Peak draw occurs during wash agitation and high-speed spin. Front-load models use less water and energy per cycle than top-load models. At 1 hour daily use, energy consumption ranges from 1200 to 1296 Wh.
Field Note
Modern washing machines are easier on power stations than their reputation suggests. Electronically controlled motors eliminate the brutal startup surges of older induction motors. The real variable is water heating: front-load models with internal heaters (Steam/Sanitize cycles) peak higher than top-load models that draw hot water from your plumbing. Use cold wash to minimize battery drain.
Frequently Asked Questions
Can the Anker SOLIX F3800 power a Washing Machine?
Yes. The Anker SOLIX F3800 provides 6000W running / 9000W surge. The Washing Machine needs 1491W / 1491W (including 15% buffer). That leaves 4509W of running headroom and 7509W of surge margin.
How long will the Anker SOLIX F3800 run a Washing Machine?
Approximately 2.1 hours, based on the Washing Machine's 1296W draw and the Anker SOLIX F3800's 3840Wh capacity (70% usable after real-world losses).
What Else Can You Run?
With 2220W allocated to the Washing Machine, the Anker SOLIX F3800 still has ~1284W of margin. These devices could run simultaneously:
🥘
Slow Cooker
200W
🧊
Portable Ice Maker
100W
☕
Coffee Maker (Brew)
800W
🥪
Microwave (Running)
1000W
🩺
CPAP (No Humidifier)
40W
📺
55' LED TV
80W
Efficiency Hack: Large appliances like the Washing Machine cycle on and off. To maximize the 2.1 hours of runtime, try to minimize how often you open the device or introduce heat loads.
Compare all 33 generators for the Washing Machine
Ranked by budget, runtime, and overall compatibility.
Technical Sourcing & Verification
ID: anker-solix-f3800-washing-machine 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = Whirlpool WTW8127LC / Maytag MVW7232HW (1296W at 10.8A). No OEM startup current published; surge modeled equal to rated draw (electronically controlled motors in all variants).
⚡ Generator Specs Source
OEM Verified
Anker SOLIX F3800 User Manual v1.1 (Specifications)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.