1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V/240V available
Yes, the Anker SOLIX F3800 can run a Portable Projector
This pairing clears the safety headroom. Required ~230W running and 230W surge; the Anker SOLIX F3800 is rated 6000W / 9000W.
Power Margin Analysis
6000W / 9000W Capacity Running 5770W headroom
230W required
Surge 8770W headroom
230W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PASSContinuous draw with safety buffer applied.
230W required -> 6,000W available (5,770W headroom)
Required 230W required
Available 6,000W
3
Surge Gate
PASSStartup peak with safety buffer applied.
230W required -> 9,000W available (8,770W headroom)
Required 230W required
Available 9,000W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 13.4h
Device profile reference: up to 3h per day.
Power bars show required versus available output for each gate.
View full compatibility reportDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
6000W
Running Power
🔋
3840Wh
Capacity
⏱️
~13.4h
Est. Runtime
☀️
2400W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 230W; generator provides 6000W.
- 2 Surge headroom: target 230W; generator provides 9000W.
- 3 Tip: leave headroom for startup spikes and warm conditions.
Model-Specific Results
3 of 3 models are SAFE or TIGHT. Most demanding model: JMGO N1S 4K (200W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Anker Nebula Mars 3 | 150W | 150W | Safe | ~17.9h | OEM Manual |
Show expert analysisTechnical: Running load is 150W from the OEM specifications section. This is a high-output portable projector profile and should be treated as a continuous electronic load. Field note: Use AC output for compatibility checks. This model includes an internal battery, which can extend total session time in real use. Can a portable power station run a portable projector for movie night? Yes. This device profile is 200W at 120V with low startup surge, so any compatible power station must first clear that power threshold; battery capacity then determines how long your movie session lasts. | |||||
| JMGO N1S 4K | 200W | 200W | Safe | ~13.4h | Engineering Est. |
Show expert analysisTechnical: The manual provides input current and voltage range but not a direct consumption number. 200W is a conservative worst-case estimate derived from the OEM input rating. Field note: If a detailed model spec sheet with direct power consumption becomes available, this variant should be updated from estimated to direct OEM watts. Can a portable power station run a portable projector for movie night? Yes. This device profile is 200W at 120V with low startup surge, so any compatible power station must first clear that power threshold; battery capacity then determines how long your movie session lasts. | |||||
| Samsung The Freestyle Gen 2 (SP-LFF3CLAX) | 50W | 50W | Safe | ~53.8h | Engineering Est. |
Show expert analysisTechnical: This model is USB-C power capable. The OEM guide explicitly requires a PD source with single-port output of at least 50W. Field note: When available, use a 60W+ USB-C PD port on the power station to avoid unnecessary inverter conversion losses. Can a portable power station run a portable projector for movie night? Yes. This device profile is 200W at 120V with low startup surge, so any compatible power station must first clear that power threshold; battery capacity then determines how long your movie session lasts. | |||||
How This Pairing Performs Across Our Database
This unit ranks #31 of 33 compatible generators for this device by buffered margin (Overkill class).
How Portable Projector Performs Across 33 Tested Generators
33 of 33 generators are SAFE+TIGHT for Portable Projector.
33
Safe+Tight
Safe 33 (100%)
Power Comparison: Anker SOLIX F3800 vs Top Alternatives for Portable Projector
Anker SOLIX F3800 Safe Overkill
Current unit
Running 6,000W
Surge 9,000W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
⚡
Outdoor & RV
Portable Projector
Outdoor Movie Night
Select Your Model:
200W
Running
200W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +15% Running Power Usage 4% Utilization
230W required 6000W Capacity
5770W headroom
Surge/Startup Peak 3% Utilization
230W required 9000W Capacity
8770W headroom
Voltage Match 120V ↔ 120V/240V ✓
Compare Similar Units
Free Tools
Station Tools
Generator Insights
The 9000W surge rating can handle typical compressor-based appliances like central air conditioners, well pumps, and refrigerators during startup. This capacity can support multiple simultaneous high-draw devices once running loads stabilize. Expect reliable operation for tools, HVAC systems, and other inductive loads that demand short-duration power spikes.
This unit employs LFP chemistry with a 3840Wh capacity, designed for stable discharge under high-demand conditions. The architecture supports both sustained and transient loads within rated limits. Source: Anker SOLIX F3800 User Manual v1.1 (Specifications) (OEM documentation).
Extend Runtime with Solar
Keep your Portable Projector running with solar • MPPT: 11– 60V • Max: 2400W
Official Anker
100W Panel
1 Hour Sun =
+0.4h per sun hour
MC4 -> XT60
Full in ~54.9h Adapter required: MC4 -> XT60.
Smart Value EcoFlow
400W Panel
1 Hour Sun =
Runs Indefinitely
MC4 -> XT60
Full in ~13.7h Adapter required: MC4 -> XT60.
Smart Value EcoFlow
400W Panel
1 Hour Sun =
Runs Indefinitely
MC4 -> XT60
Full in ~13.7h Adapter required: MC4 -> XT60.
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Portable projectors are electronic loads with low inrush compared to motors and compressors. The conservative parent profile is 200W continuous at 120V based on the highest sourced variant in this set.
Expected Behavior
Estimated runtime: ~13.4h. For outdoor movie sessions, runtime is determined by battery capacity and derate, not surge handling. Most mid-range stations pass power checks; capacity decides session length.
Field Note
USB-C powered projector paths can be more efficient than AC adapter paths when the station provides sufficient USB-C PD output.
Frequently Asked Questions
Can the Anker SOLIX F3800 power a Portable Projector?
Yes. The Anker SOLIX F3800 provides 6000W running / 9000W surge. The Portable Projector needs 230W / 230W (including 15% buffer). That leaves 5770W of running headroom and 8770W of surge margin.
How long will the Anker SOLIX F3800 run a Portable Projector?
Approximately 13.4 hours, based on the Portable Projector's 200W draw and the Anker SOLIX F3800's 3840Wh capacity (70% usable after real-world losses).
What Else Can You Run?
With 1230W allocated to the Portable Projector, the Anker SOLIX F3800 still has ~3370W of margin. These devices could run simultaneously:
💡
LED Lamp
10W
🌀
Box Fan (Medium)
60W
📺
55' LED TV
80W
🔥
Space Heater (Eco)
750W
🧊
Portable Ice Maker
100W
🎮
Gaming Laptop
230W
Power Tip: To get the most out of your Anker SOLIX F3800, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the Portable Projector
Ranked by budget, runtime, and overall compatibility.
Related Guides: How to Size a Power Station
Technical Sourcing & Verification
ID: anker-solix-f3800-portable-projector 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = JMGO N1S 4K (200W from OEM manual input rating AC 100-240V 50/60Hz 2.0A, using 100V*2.0A worst-case). Surge worst case = JMGO N1S 4K (200W, electronic load with no motor inrush).
⚡ Generator Specs Source
OEM Verified
Anker SOLIX F3800 User Manual v1.1 (Specifications)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.