1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V/240V available
Yes, the Anker SOLIX F3800 can run a Portable Oxygen Concentrator
Yes - Anker SOLIX F3800 has enough running and surge power for the Portable Oxygen Concentrator. Target ~403W running / 403W surge; the generator provides 6000W / 9000W.
Power Margin Analysis
6000W / 9000W Capacity Running 5597W headroom
403W required
Surge 8597W headroom
403W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PASSContinuous draw with safety buffer applied.
403W required -> 6,000W available (5,597W headroom)
Required 403W required
Available 6,000W
3
Surge Gate
PASSStartup peak with safety buffer applied.
403W required -> 9,000W available (8,597W headroom)
Required 403W required
Available 9,000W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 7.7h
Device profile reference: up to 24h per day.
Power bars show required versus available output for each gate.
View full compatibility reportDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
6000W
Running Power
🔋
3840Wh
Capacity
⏱️
~7.7h
Est. Runtime
☀️
2400W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 403W; generator provides 6000W.
- 2 Surge headroom: target 403W; generator provides 9000W.
- 3 Tip: leave headroom for startup spikes and warm conditions.
Model-Specific Results
3 of 3 models are SAFE or TIGHT. Most demanding model: Philips EverFlo (350W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Philips SimplyGo | 150W | 150W | Safe | ~17.9h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 150 W. **Surge:** 150 W. **Voltage:** 120 V AC. No inrush spike, consistent draw across flow settings. Field note: Verify power station inverter can deliver 150 W continuously for 24-hour cycles. Monitor battery state of charge during overnight operation. Can I run this concentrator on battery backup during a power outage? Only if your power source can supply at least 150W continuous and 150W surge at 120V. | |||||
| Philips EverFlo | 350W | 350W | Safe | ~7.7h | OEM Verified |
Show expert analysisTechnical: **Running load:** 350W continuous. **Surge:** 350W (no inrush spike). **Voltage requirement:** 120V AC. Resistive heating element drives steady draw with minimal transient. Field note: Ensure power station inverter handles 350W continuous without thermal cutoff. Voltage deviation beyond ±5% may trigger device fault alarms. Can I run this on a portable power station during an outage? Only if your power source can supply at least 350W continuous and 350W surge at 120V. Verify capacity in watt-hours exceeds your runtime need. | |||||
| Drive DeVilbiss 5L | 310W | 310W | Safe | ~8.7h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 310W continuous. **Surge:** 310W (no starting transient). **Voltage:** requires 120V AC. The device demands 7440 Wh over a 24-hour period. Field note: Medical oxygen concentrators tolerate no interruption. Verify the power station supports pass-through charging during mains operation. Can I run this oxygen concentrator on a portable power station during an outage? Only if your power source can supply at least 310W continuous and 310W surge at 120V. No compatibility is guaranteed. | |||||
How This Pairing Performs Across Our Database
This unit ranks #27 of 29 compatible generators for this device by buffered margin (Overkill class).
How Portable Oxygen Concentrator Performs Across 33 Tested Generators
29 of 33 generators are SAFE+TIGHT for Portable Oxygen Concentrator.
29
Safe+Tight
Safe 29 (88%)
Fail 4 (12%)
Power Comparison: Anker SOLIX F3800 vs Top Alternatives for Portable Oxygen Concentrator
Anker SOLIX F3800 Safe Overkill
Current unit
Running 6,000W
Surge 9,000W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
Medical
Portable Oxygen Concentrator
Medical Emergency Backup
Select Your Model:
350W
Running
350W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +15% Running Power Usage 7% Utilization
403W required 6000W Capacity
5597W headroom
Surge/Startup Peak 4% Utilization
403W required 9000W Capacity
8597W headroom
Voltage Match 120V ↔ 120V/240V ✓
Compare Similar Units
Free Tools
Station Tools
Generator Insights
The 9000W surge rating can handle typical compressor-based appliances like central air conditioners, well pumps, and refrigerators during startup. This capacity can support multiple simultaneous high-draw devices once running loads stabilize. Expect reliable operation for tools, HVAC systems, and other inductive loads that demand short-duration power spikes.
This unit employs LFP chemistry with a 3840Wh capacity, designed for stable discharge under high-demand conditions. The architecture supports both sustained and transient loads within rated limits. Source: Anker SOLIX F3800 User Manual v1.1 (Specifications) (OEM documentation).
Extend Runtime with Solar
Keep your Portable Oxygen Concentrator running with solar • MPPT: 11– 60V • Max: 2400W
Official Anker
100W Panel
1 Hour Sun =
+0.2h per sun hour
MC4 -> XT60
Full in ~54.9h Adapter required: MC4 -> XT60.
Smart Value EcoFlow
400W Panel
1 Hour Sun =
+0.8h per sun hour
MC4 -> XT60
Full in ~13.7h Adapter required: MC4 -> XT60.
Smart Value EcoFlow
400W Panel
1 Hour Sun =
+0.8h per sun hour
MC4 -> XT60
Full in ~13.7h Adapter required: MC4 -> XT60.
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running range: 150W (portable SimplyGo) to 350W (stationary EverFlo). Surge: modeled equal to running — no OEM startup current published for any oxygen concentrator in this class. Voltage: 120V AC.
Expected Behavior
Estimated runtime: ~7.7h. Stationary concentrators operate 24 hours daily at constant draw, consuming 7,440-8,400 Wh per day. Portable units draw less but still require continuous power for uninterrupted oxygen delivery.
Field Note
Oxygen concentrators are life-critical — always have a backup power source. Use pure sine wave output only. Verify pass-through charging capability so the power station stays charged while the concentrator runs on mains power.
Frequently Asked Questions
Can the Anker SOLIX F3800 power a Portable Oxygen Concentrator?
Yes. The Anker SOLIX F3800 provides 6000W running / 9000W surge. The Portable Oxygen Concentrator needs 403W / 403W (including 15% buffer). That leaves 5597W of running headroom and 8597W of surge margin.
How long will the Anker SOLIX F3800 run a Portable Oxygen Concentrator?
Approximately 7.7 hours, based on the Portable Oxygen Concentrator's 350W draw and the Anker SOLIX F3800's 3840Wh capacity (70% usable after real-world losses).
What Else Can You Run?
With 1470W allocated to the Portable Oxygen Concentrator, the Anker SOLIX F3800 still has ~2980W of margin. These devices could run simultaneously:
🌬️
Nebulizer
60W
❄️
Medical Fridge
80W
🩺
CPAP (No Humidifier)
40W
🎮
Gaming Laptop
230W
🥪
Microwave (Running)
1000W
🌀
Box Fan (Medium)
60W
Pro Tip for Medical Users: According to energy reports, turning off the humidifier on your Portable Oxygen Concentrator can double your runtime. Using a DC cable instead of the AC plug is also recommended to avoid inverter inefficiency.
Compare all 33 generators for the Portable Oxygen Concentrator
Ranked by budget, runtime, and overall compatibility.
Related Guides: How to Size a Power Station
Technical Sourcing & Verification
ID: anker-solix-f3800-oxygen-concentrator 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = Philips EverFlo (350W). Surge = running for all variants (no OEM startup current published for any oxygen concentrator in this class; surge modeled equal to running).
⚡ Generator Specs Source
OEM Verified
Anker SOLIX F3800 User Manual v1.1 (Specifications)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.