1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
Yes, the SOLIX C800 Plus can run a WiFi Router
This pairing clears the safety headroom. Required ~87W running and 87W surge; the SOLIX C800 Plus is rated 1200W / 1600W.
Power Margin Analysis
1200W / 1600W Capacity Running 1113W headroom
87W required
Surge 1513W headroom
87W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PASSContinuous draw with safety buffer applied.
87W required -> 1,200W available (1,113W headroom)
Required 87W required
Available 1,200W
3
Surge Gate
PASSStartup peak with safety buffer applied.
87W required -> 1,600W available (1,513W headroom)
Required 87W required
Available 1,600W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 7.2h
Device profile reference: up to 24h per day.
Power bars show required versus available output for each gate.
View full compatibility reportDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
1200W
Running Power
🔋
768Wh
Capacity
⏱️
~7.2h
Est. Runtime
☀️
300W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 87W; generator provides 1200W.
- 2 Surge headroom: target 87W; generator provides 1600W.
- 3 Tip: leave headroom for startup spikes and warm conditions.
Model-Specific Results
6 of 6 models are SAFE or TIGHT. Most demanding model: Starlink Router (Gen 3) (75W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| NETGEAR R6220 | 18W | 18W | Safe | ~29.9h | OEM Verified |
Show expert analysisTechnical: **Running load:** 18W continuous. **Surge:** 18W (no inrush spike). **Voltage:** requires 120V AC. Most portable power stations provide 120V AC outlets and can handle this steady-state load. Field note: Verify your power station's inverter can sustain 18W for extended periods without entering sleep mode. Some units disable AC output below 20W. Will this router maintain emergency connectivity during a 48-hour outage? Only if your power source can supply at least 18W continuous and 18W surge at 120V. It depends on your power station's usable capacity. | |||||
| NETGEAR R6700v3 | 30W | 30W | Safe | ~17.9h | OEM Verified |
Show expert analysisTechnical: **Running load:** 30 W. **Surge:** 30 W. **Voltage:** 120 V AC. No surge above steady state. Compatible with any 120 V AC inverter output rated 30 W or higher. Field note: Ensure power station inverter remains enabled continuously. Router uptime depends on uninterrupted AC supply. Can I run this router on a 500 Wh power station for a full day? Only if your power source can supply at least 30W continuous and 30W surge at 120V. Only if the power station supplies at least 720 Wh of usable AC capacity and you do not load other devices simultaneously. | |||||
| NETGEAR R7000 | 42W | 42W | Safe | ~12.8h | OEM Verified |
Show expert analysisTechnical: **Running load:** 42 W. **Surge:** 42 W (no inrush). Requires 120V AC. Most portable power stations rated 120V 60Hz and ≥100W continuous output can supply this load, provided the waveform is compatible with the internal SMPS. Field note: Verify the power station's continuous output rating exceeds 42 W with margin. Some consumer units throttle under sustained load. Can I run this router on a 500 Wh power station for a full day? Only if your power source can supply at least 42W continuous and 42W surge at 120V. Only if you recharge partway through or reduce usage hours. 24-hour operation consumes 1008 Wh, exceeding a 500 Wh capacity. | |||||
| Starlink Router (Gen 3) | 75W | 75W | Safe | ~7.2h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 75 W (estimated). **Surge:** 75 W (no inrush). **Voltage:** 120 V AC required. The 300W PSU rating covers maximum input capacity, not typical draw. Actual router consumption is a fraction of the PSU rating. Field note: Do not confuse the PSU input rating (300W) with actual consumption. The router draws far less. If powering the full Starlink system (dish + router), see the Starlink System device instead. Does the Starlink router really draw 300W? No. The 300W figure is the power supply's maximum input rating, not actual consumption. The router itself draws approximately 50-75W. The dish (terminal) has its own power path. | |||||
| Starlink Router (Standard Actuated) | 50W | 50W | Safe | ~10.8h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 50 W (estimated). **Surge:** 50 W (no inrush). Requires 120V AC. The 192W PSU rating is maximum input capacity, not typical draw. Field note: The 192W figure on the spec sheet is the PSU max rating, not actual router consumption. If powering the full Starlink system (dish + router), see the Starlink System device. Does this router really draw 192W? No. The 192W is the power supply's maximum input rating. Actual router consumption is approximately 40-50W. | |||||
| Starlink Router Mini | 40W | 40W | Safe | ~13.4h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 40 W (estimated). **Surge:** 40 W (no inrush spike). **Voltage:** 120 V AC required. Compact mesh router with lower processing overhead than the Gen 3. Field note: The 192W on the spec sheet is the PSU max rating. Starlink Mini ships with a USB-C power supply — verify AC adapter spec if using inverter output instead of native DC. Does the Mini router really draw 192W? No. The 192W is the power supply's maximum input rating. The Mini router draws approximately 30-40W. For the full Starlink Mini system (dish + router), see the Starlink System device. | |||||
How This Pairing Performs Across Our Database
This unit ranks #9 of 33 compatible generators for this device by buffered margin (Overkill class).
How WiFi Router Performs Across 33 Tested Generators
33 of 33 generators are SAFE+TIGHT for WiFi Router.
33
Safe+Tight
Safe 33 (100%)
Power Comparison: Anker SOLIX C800 Plus vs Top Alternatives for WiFi Router
Anker SOLIX C800 Plus Safe Overkill
Current unit
Running 1,200W
Surge 1,600W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
🏠
Work from Home
WiFi Router
Emergency Communications
Select Your Model:
75W
Running
75W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +15% Running Power Usage 7% Utilization
87W required 1200W Capacity
1113W headroom
Surge/Startup Peak 5% Utilization
87W required 1600W Capacity
1513W headroom
Voltage Match 120V ↔ 120V ✓
Compare Similar Units
Free Tools
Station Tools
Generator Insights
The 1600W surge rating can support startup sequences for refrigerator compressors, well pumps, and similar inductive motor loads that draw 25 to 33 percent over running current during initial engagement. Once running, the 1200W continuous output can handle typical kitchen appliances, electronics, and power tools within rated limits. This combination addresses both inrush events and sustained runtime needs in backup scenarios.
This unit uses LFP chemistry, a battery architecture chosen for thermal stability in consumer power stations. The 768Wh capacity and 1200W continuous output allow sustained operation without thermal stress under typical residential loads. Source: Anker SOLIX C800 Plus Tech Specs (manufacturer documentation).
Extend Runtime with Solar
Keep your WiFi Router running with solar • MPPT: 11– 60V • Max: 300W
Official Anker
100W Panel
1 Hour Sun =
+0.9h per sun hour
MC4 -> XT60
Full in ~11h Adapter required: MC4 -> XT60.
Smart Value Bluetti
200W Panel
1 Hour Sun =
Runs Indefinitely
MC4 -> XT60
Full in ~5.5h Adapter required: MC4 -> XT60.
Smart Value BougeRV
200W Panel
1 Hour Sun =
Runs Indefinitely
MC4 -> XT60
Full in ~5.5h Adapter required: MC4 -> XT60.
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running load: 18-75 W depending on model. Surge: same as running (no inrush). Requires 120 V AC. WiFi routers are constant-draw electronic devices with no motor or compressor.
Expected Behavior
Estimated runtime: ~7.2h. Operates 24 hours/day at steady draw. Daily energy ranges from 432 Wh (basic router) to 1800 Wh (high-end mesh). No cycling or transient events.
Field Note
Some power stations disable AC output below 20-25W (eco mode). Verify your station can sustain low-wattage loads continuously. For Starlink routers, do not confuse the PSU max input rating with actual consumption.
Frequently Asked Questions
Can the Anker SOLIX C800 Plus power a WiFi Router?
Yes. The Anker SOLIX C800 Plus provides 1200W running / 1600W surge. The WiFi Router needs 87W / 87W (including 15% buffer). That leaves 1113W of running headroom and 1513W of surge margin.
How long will the SOLIX C800 Plus run a WiFi Router?
Approximately 7.2 hours, based on the WiFi Router's 75W draw and the SOLIX C800 Plus's 768Wh capacity (70% usable after real-world losses).
What Else Can You Run?
With 445W allocated to the WiFi Router, the SOLIX C800 Plus still has ~440W of margin. These devices could run simultaneously:
📱
Smartphone Fast-Charge
20W
🎮
Gaming Laptop
230W
💻
MacBook Air/Pro
65W
🖥️
24' Monitor
30W
🩺
CPAP (No Humidifier)
40W
🌬️
Nebulizer
60W
Power Tip: To get the most out of your SOLIX C800 Plus, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the WiFi Router
Ranked by budget, runtime, and overall compatibility.
Related Guides: How to Size a Power Station
Technical Sourcing & Verification
ID: anker-solix-c800-plus-wifi-router 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Merged from: wifi-router-generic, wifi-router-starlink.
⚡ Generator Specs Source
OEM Verified
Anker SOLIX C800 Plus User Manual (EN-US)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.