1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
No — the SOLIX C800 Plus is underpowered for a Level 1 EV Charger
No - this pairing is underpowered. Safe target ~1656W running / 1656W surge; the generator provides 1200W / 1600W.
- • Continuous power shortfall: needs 1440W (safe target ~1656W), generator provides 1200W.
Power Margin Analysis
1200W / 1600W Capacity Running 456W short
1656W required
Surge 56W short
1656W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
FAILContinuous draw with safety buffer applied.
1,656W required -> 1,200W available (456W short)
Required 1,656W required
Available 1,200W
3
Surge Gate
FAILStartup peak with safety buffer applied.
1,656W required -> 1,600W available (56W short)
Required 1,656W required
Available 1,600W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Runtime estimate appears after running and surge gates pass.
Power bars show required versus available output for each gate.
See generators that pass nativelyDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
1200W
Running Power
🔋
768Wh
Capacity
⏱️
—
Est. Runtime
☀️
300W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 1656W; generator provides 1200W.
- 2 Surge headroom: target 1656W; generator provides 1600W.
- 3 Result: pick a higher-output unit for safe operation.
What To Do Instead
- 1 Underpowered: The EV Charger (Level 1, 120V) needs 1656W running / 1656W surge (with 15% buffer). The SOLIX C800 Plus provides 1200W / 1600W.
- 2 Safe target: Look for a power station with at least 1656W continuous and 1656W surge at 120V.
- 3 Compatible alternative: The DELTA 2 (1800W / 2700W surge) clears this device's requirements.
Model-Specific Results
0 of 3 models are SAFE or TIGHT. Most demanding model: Tesla Mobile Connector Gen 2 (NEMA 5-15, 12A) (1,440W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Tesla Mobile Connector Gen 2 (NEMA 5-15, 12A) | 1,440W | 1,440W | Fail | — | OEM Manual |
Show expert analysisTechnical: **Running load:** 1440 W (12A at 120V). **Surge:** 1440 W (no inrush — EVSE is a pass-through device, not a transformer). **Voltage:** 120 V AC required (NEMA 5-15 outlet). The Mobile Connector simply passes AC power to the vehicle's onboard charger. Field note: Level 1 charging on a portable power station is an emergency-only strategy. At 1440W continuous, even a large 4 kWh station provides under 2 hours of charging (~5 miles of range). Useful for getting to the nearest charging station, not for a full charge. Can I charge my Tesla from a portable power station? Yes, if it delivers 1440W continuous at 120V. But runtime is the real limit — a 2000Wh station adds only about 2-3 miles of range. Useful in an emergency to reach the nearest Supercharger. | |||||
| Ford Mobile Charger (NEMA 5-15, 12A) | 1,440W | 1,440W | Fail | — | OEM Manual |
Show expert analysisTechnical: **Running load:** 1440 W (12A at 120V). **Surge:** 1440 W (pass-through EVSE, no inrush). **Voltage:** 120 V AC required. The Ford Mobile Charger supports both 120V (Level 1) and 240V (Level 2) with different adapters. Field note: The Ford Mobile Charger comes included with F-150 Lightning and Mustang Mach-E. On a portable power station, expect only emergency-level charging — enough to reach the nearest public charger, not for daily commuting. Can I charge my F-150 Lightning from a portable power station? Yes, at Level 1 (1440W). But the Lightning's 131 kWh battery would take 90+ hours to fully charge at this rate. A power station provides emergency range only — a few miles per hour of charging. | |||||
| Lectron Level 1 J1772 EVSE (NEMA 5-15, 12A) | 1,440W | 1,440W | Fail | — | OEM Verified |
Show expert analysisTechnical: **Running load:** 1440 W (12A at 120V). **Surge:** 1440 W (pass-through EVSE). **Voltage:** 120 V AC required. Universal J1772 connector compatible with all non-Tesla EVs (BMW, Hyundai, Kia, Ford, Chevy, etc.). Tesla owners need a J1772-to-Tesla adapter. Field note: The Lectron is the most versatile option — J1772 works with nearly every EV in the US except Tesla (which needs an adapter). At $100-150, it's an affordable emergency charging backup to pair with a portable power station. Can I use a portable power station as an emergency EV charger? Yes — any power station rated 1500W+ continuous at 120V can run a Level 1 EVSE. The limiting factor is battery capacity. A 2000Wh station provides roughly 1 hour of charging, adding 2-5 miles of range. | |||||
How This Pairing Performs Across Our Database
This unit is outside the compatible set; 23 of 33 generators pass SAFE/TIGHT for this device.
How EV Charger (Level 1, 120V) Performs Across 33 Tested Generators
23 of 33 generators are SAFE+TIGHT for EV Charger (Level 1, 120V).
23
Safe+Tight
Safe 21 (64%)
Tight 2 (6%)
Fail 10 (30%)
Power Comparison: Anker SOLIX C800 Plus vs Top Alternatives for EV Charger (Level 1, 120V)
Anker SOLIX C800 Plus Fail
Current unit
Running 1,200W
Surge 1,600W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
⚡
EV & Transportation
EV Charger (Level 1, 120V)
Overnight EV Charging
Select Your Model:
1440W
Running
1440W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +15% Running Power Usage 138% Utilization
1656W required 1200W Capacity
456W short
Surge/Startup Peak 103% Utilization
1656W required 1600W Capacity
56W short
Voltage Match 120V ↔ 120V ✓
Startup Surge Visual
Startup Surge
EV Charger (Level 1, 120V) vs SOLIX C800 Plus
Startup surge stays within the power station surge limit.
Compatible Alternatives to SOLIX C800 Plus
These generators meet EV Charger (Level 1, 120V)'s voltage, running, and surge requirements.
Best Value 
DELTA 2
1800W • 1024Wh
Runtime at your load
~0.5h
Capacity Fit Fixed 1024Wh
Lowest capacity that still clears surge + running load.
Max Runtime 
Delta Pro
3600W • 3600Wh
Runtime at your load
~1.8h
Longest Runtime Expandable to 25000Wh
Expandable to 25000Wh.
Compare Similar Units
Generator Insights
The 1600W surge rating can support startup sequences for refrigerator compressors, well pumps, and similar inductive motor loads that draw 25 to 33 percent over running current during initial engagement. Once running, the 1200W continuous output can handle typical kitchen appliances, electronics, and power tools within rated limits. This combination addresses both inrush events and sustained runtime needs in backup scenarios.
This unit uses LFP chemistry, a battery architecture chosen for thermal stability in consumer power stations. The 768Wh capacity and 1200W continuous output allow sustained operation without thermal stress under typical residential loads. Source: Anker SOLIX C800 Plus Tech Specs (manufacturer documentation).
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running load: 1440 W (12A at 120V — the maximum continuous draw on a standard 120V outlet per NEC 80% rule). Surge: 1440 W (no inrush — EVSEs are pass-through devices). Voltage: 120 V AC required. All Level 1 EVSEs draw the same 1440W regardless of brand.
Expected Behavior
Draws a perfectly flat 1440W for the entire charging session. Provides 2-5 miles of range per hour depending on vehicle. An 8-hour overnight session consumes 11,520 Wh — far more than most portable power stations can deliver.
Field Note
Level 1 EV charging on a portable power station is strictly an emergency strategy. The math is simple: 1440W continuous means even a large 4 kWh station provides under 2 hours of charging. Useful to reach the nearest public charger, not for daily use.
Frequently Asked Questions
Can the Anker SOLIX C800 Plus power a Level 1 EV Charger?
No. The Anker SOLIX C800 Plus falls short on both running (1200W offered vs 1656W needed) and surge (1600W offered vs 1656W needed). Safe targets include a 15% buffer for the EV Charger (Level 1, 120V)'s electronic load profile.
How long will the SOLIX C800 Plus run a Level 1 EV Charger?
No reliable runtime estimate — this pairing is not compatible. The Anker SOLIX C800 Plus cannot safely power the EV Charger (Level 1, 120V). See compatible alternatives above for power stations that meet this device's requirements.
Power Tip: To get the most out of your SOLIX C800 Plus, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the EV Charger (Level 1, 120V)
Ranked by budget, runtime, and overall compatibility.
Related Guides: How to Size a Power Station
Technical Sourcing & Verification
ID: anker-solix-c800-plus-ev-charger-level1 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). All three variants draw 12A @ 120V = 1440W. Level 1 EVSEs are pass-through devices — the 12A limit is set by NEC 80% continuous rule on a 15A circuit (NEMA 5-15).
⚡ Generator Specs Source
OEM Verified
Anker SOLIX C800 Plus User Manual (EN-US)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.