1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
Yes, the SOLIX C1000 can run a Portable Oxygen Concentrator
This pairing clears the safety headroom. Required ~403W running and 403W surge; the SOLIX C1000 is rated 1800W / 2400W.
Power Margin Analysis
1800W / 2400W Capacity Running 1397W headroom
403W required
Surge 1997W headroom
403W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PASSContinuous draw with safety buffer applied.
403W required -> 1,800W available (1,397W headroom)
Required 403W required
Available 1,800W
3
Surge Gate
PASSStartup peak with safety buffer applied.
403W required -> 2,400W available (1,997W headroom)
Required 403W required
Available 2,400W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 2.1h
Device profile reference: up to 24h per day.
Power bars show required versus available output for each gate.
View full compatibility reportDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
1800W
Running Power
🔋
1056Wh
Capacity
⏱️
~2.1h
Est. Runtime
☀️
600W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 403W; generator provides 1800W.
- 2 Surge headroom: target 403W; generator provides 2400W.
- 3 Tip: leave headroom for startup spikes and warm conditions.
Model-Specific Results
3 of 3 models are SAFE or TIGHT. Most demanding model: Philips EverFlo (350W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Philips SimplyGo | 150W | 150W | Safe | ~4.9h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 150 W. **Surge:** 150 W. **Voltage:** 120 V AC. No inrush spike, consistent draw across flow settings. Field note: Verify power station inverter can deliver 150 W continuously for 24-hour cycles. Monitor battery state of charge during overnight operation. Can I run this concentrator on battery backup during a power outage? Only if your power source can supply at least 150W continuous and 150W surge at 120V. | |||||
| Philips EverFlo | 350W | 350W | Safe | ~2.1h | OEM Verified |
Show expert analysisTechnical: **Running load:** 350W continuous. **Surge:** 350W (no inrush spike). **Voltage requirement:** 120V AC. Resistive heating element drives steady draw with minimal transient. Field note: Ensure power station inverter handles 350W continuous without thermal cutoff. Voltage deviation beyond ±5% may trigger device fault alarms. Can I run this on a portable power station during an outage? Only if your power source can supply at least 350W continuous and 350W surge at 120V. Verify capacity in watt-hours exceeds your runtime need. | |||||
| Drive DeVilbiss 5L | 310W | 310W | Safe | ~2.4h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 310W continuous. **Surge:** 310W (no starting transient). **Voltage:** requires 120V AC. The device demands 7440 Wh over a 24-hour period. Field note: Medical oxygen concentrators tolerate no interruption. Verify the power station supports pass-through charging during mains operation. Can I run this oxygen concentrator on a portable power station during an outage? Only if your power source can supply at least 310W continuous and 310W surge at 120V. No compatibility is guaranteed. | |||||
How This Pairing Performs Across Our Database
This unit ranks #7 of 29 compatible generators for this device by buffered margin (Overkill class).
How Portable Oxygen Concentrator Performs Across 33 Tested Generators
29 of 33 generators are SAFE+TIGHT for Portable Oxygen Concentrator.
29
Safe+Tight
Safe 29 (88%)
Fail 4 (12%)
Power Comparison: Anker SOLIX C1000 vs Top Alternatives for Portable Oxygen Concentrator
Anker SOLIX C1000 Safe Overkill
Current unit
Running 1,800W
Surge 2,400W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
Medical
Portable Oxygen Concentrator
Medical Emergency Backup
Select Your Model:
350W
Running
350W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +15% Running Power Usage 22% Utilization
403W required 1800W Capacity
1397W headroom
Surge/Startup Peak 17% Utilization
403W required 2400W Capacity
1997W headroom
Voltage Match 120V ↔ 120V ✓
Compare Similar Units
Free Tools
Station Tools
Generator Insights
The 2400 W surge can support typical startup events for refrigerator compressors, well pumps, and other inductive loads in the 1 to 1.5 HP range. The 1800 W continuous rating sustains moderate resistive and mixed loads once motors reach running speed. This combination handles most residential backup scenarios where brief inrush current precedes steady operation.
This unit provides a documented 2400 W surge window to handle motor inrush events without nuisance trips. LFP chemistry offers structural stability under load cycling. Source: Anker SOLIX C1000 User Manual (Output Specs) (manufacturer documentation).
Extend Runtime with Solar
Keep your Portable Oxygen Concentrator running with solar • MPPT: 11– 60V • Max: 600W
Official Anker
100W Panel
1 Hour Sun =
+0.2h per sun hour
MC4 -> XT60
Full in ~15.1h Adapter required: MC4 -> XT60.
Smart Value EcoFlow
400W Panel
1 Hour Sun =
+0.8h per sun hour
MC4 -> XT60
Full in ~3.8h Adapter required: MC4 -> XT60.
Smart Value Bluetti
350W Panel
1 Hour Sun =
+0.7h per sun hour
MC4 -> XT60
Full in ~4.3h Adapter required: MC4 -> XT60.
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running range: 150W (portable SimplyGo) to 350W (stationary EverFlo). Surge: modeled equal to running — no OEM startup current published for any oxygen concentrator in this class. Voltage: 120V AC.
Expected Behavior
Estimated runtime: ~2.1h. Stationary concentrators operate 24 hours daily at constant draw, consuming 7,440-8,400 Wh per day. Portable units draw less but still require continuous power for uninterrupted oxygen delivery.
Field Note
Oxygen concentrators are life-critical — always have a backup power source. Use pure sine wave output only. Verify pass-through charging capability so the power station stays charged while the concentrator runs on mains power.
Frequently Asked Questions
Can the Anker SOLIX C1000 power a Portable Oxygen Concentrator?
Yes. The Anker SOLIX C1000 provides 1800W running / 2400W surge. The Portable Oxygen Concentrator needs 403W / 403W (including 15% buffer). That leaves 1397W of running headroom and 1997W of surge margin.
How long will the SOLIX C1000 run a Portable Oxygen Concentrator?
Approximately 2.1 hours, based on the Portable Oxygen Concentrator's 350W draw and the SOLIX C1000's 1056Wh capacity (70% usable after real-world losses).
What Else Can You Run?
With 535W allocated to the Portable Oxygen Concentrator, the SOLIX C1000 still has ~555W of margin. These devices could run simultaneously:
❄️
Medical Fridge
80W
🌬️
Nebulizer
60W
🩺
CPAP (No Humidifier)
40W
🌀
Box Fan (Medium)
60W
💻
MacBook Air/Pro
65W
🎮
Gaming Laptop
230W
Pro Tip for Medical Users: According to energy reports, turning off the humidifier on your Portable Oxygen Concentrator can double your runtime. Using a DC cable instead of the AC plug is also recommended to avoid inverter inefficiency.
Compare all 33 generators for the Portable Oxygen Concentrator
Ranked by budget, runtime, and overall compatibility.
Related Guides: How to Size a Power Station
Technical Sourcing & Verification
ID: anker-solix-c1000-oxygen-concentrator 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = Philips EverFlo (350W). Surge = running for all variants (no OEM startup current published for any oxygen concentrator in this class; surge modeled equal to running).
⚡ Generator Specs Source
OEM Verified
Anker SOLIX C1000 User Manual (A1761, EN-US)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.