1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
Maybe — the SOLIX C1000 needs a soft starter for a Dehumidifier (70 Pint)
Maybe - startup surge is the blocker. With a soft-starter, estimated startup drops to ~1501W (safe target 1876W), which this unit can handle.
- • Startup surge shortfall: needs 3335W (safe target ~4169W), generator provides 2400W.
- • Soft-starter path: estimated startup ~1501W (safe target ~1876W).
Power Margin Analysis
1800W / 2400W Capacity Running 725W headroom
1075W required
Surge 1769W short
4169W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PASSContinuous draw with safety buffer applied.
1,075W required -> 1,800W available (725W headroom)
Required 1,075W required
Available 1,800W
3
Surge Gate
FAILStartup peak with safety buffer applied.
4,169W required -> 2,400W available (1,769W short)
Required 4,169W required
Available 2,400W
3b
With Soft-Start
PASSAlternative startup path with reduced inrush.
1,876W required -> 2,400W available (524W headroom)
Required 1,876W
Available 2,400W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 0.9h
Device profile reference: up to 24h per day.
Power bars show required versus available output for each gate.
See soft-start optionsDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
1800W
Running Power
🔋
1056Wh
Capacity
⏱️
~0.9h
Est. Runtime
☀️
600W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 1075W; generator provides 1800W.
- 2 Startup surge: soft-starter target ~1876W; generator provides 2400W.
- 3 Result: viable only with a soft-starter.
What To Do Instead
- 1 Install a soft-starter: Reduces the Dehumidifier (70 Pint)'s startup surge from 3335W to ~1501W, within the SOLIX C1000's 2400W surge capacity.
- 2 Or size up: Without a soft-starter, you need at least 4169W surge capacity (3335W × 25% buffer).
- 3 No-install alternative: The Explorer 2000 Plus (6000W surge) handles the full 3335W startup natively — no soft-starter needed.
Model-Specific Results
0 of 3 models are SAFE or TIGHT. Most demanding model: Midea EasyDry MDP70SR71 (70 Pint) (3,335W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Midea EasyDry MDP70SR71 (70 Pint) | 690W | 3,335W | Soft Start | ~1.1h | OEM Manual |
Show expert analysisTechnical: **Voltage:** 120V AC required. **Running load:** 690W. **Surge:** 3335W at startup (compressor-driven). Only power stations with inverter surge capacity ≥3335W and continuous output ≥690W are candidates. Field note: Verify the power station's surge window duration. Short-duration surge ratings may not accommodate refrigerant compressor startup transients reliably. Can I run this dehumidifier on a portable power station overnight? Only if your power source can supply at least 690W continuous and 3335W surge at 120V. It depends on the station's surge capacity and battery size. | |||||
| Midea EasyDry MDP70PR71 with Pump (70 Pint) | 690W | 3,335W | Soft Start | ~1.1h | OEM Manual |
Show expert analysisTechnical: **Running load:** 690 W. **Surge demand:** 3,335 W at compressor start. Requires 120V AC output. Power station must deliver the full surge envelope without tripping overcurrent protection. Field note: Ensure your power station's inverter can handle the 3,335 W surge without shutdown. Verify outlet capacity exceeds continuous draw. Can I run this dehumidifier on a portable power station? Only if your power source can supply at least 690W continuous and 3335W surge at 120V. Most portable units cannot meet the surge requirement. | |||||
| Haier HEN70ETF (70 Pint) | 860W | 2,580W | Soft Start | ~0.9h | OEM Verified |
Show expert analysisTechnical: **Running load:** 860W. **Surge:** 2580W at startup. Requires 120V AC output. Power station must sustain 860W continuous and handle 2580W compressor inrush without tripping. Field note: Size the power station to at least 125% of running load (1075W minimum output) to avoid nuisance shutdowns during concurrent household draw. Can I run this dehumidifier overnight on a portable power station? Only if your power source can supply at least 860W continuous and 2580W surge at 120V. Most portable units lack sufficient capacity for full-day basement moisture control. | |||||
How This Pairing Performs Across Our Database
This unit is borderline without mitigation; 17 of 33 generators meet SAFE/TIGHT margins for this device.
How Dehumidifier (70 Pint) Performs Across 33 Tested Generators
17 of 33 generators are SAFE+TIGHT for Dehumidifier (70 Pint).
17
Safe+Tight
Safe 12 (36%)
Tight 5 (15%)
Soft Start 6 (18%)
Fail 10 (30%)
Power Comparison: Anker SOLIX C1000 vs Top Alternatives for Dehumidifier (70 Pint)
Anker SOLIX C1000 Soft Start
Current unit
Running 1,800W
Surge 2,400W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
Heating & Cooling
Dehumidifier (70 Pint)
Basement Moisture Control
Select Your Model:
860W
Running
3335W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +25% Running Power Usage 60% Utilization
1075W required 1800W Capacity
725W headroom
Surge/Startup Peak 174% Utilization
4169W required 2400W Capacity
1769W short
Voltage Match 120V ↔ 120V ✓
Startup Surge Visual
Startup Surge
Dehumidifier (70 Pint) vs SOLIX C1000
Startup surge exceeds the power station limit. A soft starter may resolve the surge gap.
With Soft Starter
Dehumidifier (70 Pint) vs SOLIX C1000
Soft start reduces the startup spike and can bring the load under the surge limit.
⚡ Soft-Starter Required
The Dehumidifier (70 Pint)'s startup surge (3335W) exceeds this generator's capacity. A soft-starter can reduce inrush current by ~55%, bringing surge down to approximately 1501W.
Original Surge:
3335W
→
With Soft-Start:
~1501W
⚠️
Before You Buy: Connection Check
Installation warning
These systems are often hardwired to a home panel. To run them from a portable station, you may need a transfer switch installed by an electrician. You cannot just plug it in.
No-Install Alternatives to SOLIX C1000
Prefer not to install a soft starter on Dehumidifier (70 Pint)? These generators can start this load natively.
Best Value 
Explorer 2000 Plus
3000W • 2042Wh
Runtime at your load
~1.7h
Capacity Fit Expandable to 12000Wh
Lowest capacity that still clears surge + running load.
Max Runtime 
Delta Pro
3600W • 3600Wh
Runtime at your load
~2.9h
Longest Runtime Expandable to 25000Wh
Expandable to 25000Wh.
Compare Similar Units
Free Tools
Station Tools
Generator Insights
The 2400 W surge can support typical startup events for refrigerator compressors, well pumps, and other inductive loads in the 1 to 1.5 HP range. The 1800 W continuous rating sustains moderate resistive and mixed loads once motors reach running speed. This combination handles most residential backup scenarios where brief inrush current precedes steady operation.
This unit provides a documented 2400 W surge window to handle motor inrush events without nuisance trips. LFP chemistry offers structural stability under load cycling. Source: Anker SOLIX C1000 User Manual (Output Specs) (manufacturer documentation).
Extend Runtime with Solar
Keep your Dehumidifier (70 Pint) running with solar • MPPT: 11– 60V • Max: 600W
Official Anker
100W Panel
1 Hour Sun =
+0.1h per sun hour
MC4 -> XT60
Full in ~15.1h Adapter required: MC4 -> XT60.
Smart Value EcoFlow
400W Panel
1 Hour Sun =
+0.3h per sun hour
MC4 -> XT60
Full in ~3.8h Adapter required: MC4 -> XT60.
Smart Value Bluetti
350W Panel
1 Hour Sun =
+0.3h per sun hour
MC4 -> XT60
Full in ~4.3h Adapter required: MC4 -> XT60.
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running load: 860 W continuous. Surge demand: 3335 W at compressor startup. Voltage: 120 V AC required. Power station must handle the surge margin and sustain the load for the intended duration.
Expected Behavior
Estimated runtime: ~0.9h. Operates 24 hours per day drawing approximately 20640 Wh daily. Compressor cycles cause brief high-current transients during startup then settles to steady draw.
Field Note
Verify the power station inverter rating exceeds 3335 W surge capacity. Undersized units will trip during compressor kick-in.
Frequently Asked Questions
Can the Anker SOLIX C1000 power a Dehumidifier (70 Pint)?
Conditionally — with a soft-starter. The Anker SOLIX C1000's 2400W surge cannot handle the Dehumidifier (70 Pint)'s 3335W startup. A soft-starter reduces estimated surge to ~1501W (safe target 1876W with 25% buffer), within the Anker SOLIX C1000's capacity. Running power (860W, safe target 1075W) is not an issue.
How long will the SOLIX C1000 run a Dehumidifier (70 Pint)?
With a soft-starter installed, estimated runtime is approximately 0.9 hours, based on 860W running draw and 1056Wh capacity (70% usable). Without a soft-starter, the Dehumidifier (70 Pint)'s 3335W startup surge exceeds the SOLIX C1000's 2400W surge capacity and the device will not start.
Power Tip: To get the most out of your SOLIX C1000, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the Dehumidifier (70 Pint)
Ranked by budget, runtime, and overall compatibility.
Technical Sourcing & Verification
ID: anker-solix-c1000-dehumidifier-70pint 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = Haier HEN70ETF (860W). Surge worst case = Midea EasyDry MDP70SR71 (3335W).
⚡ Generator Specs Source
OEM Verified
Anker SOLIX C1000 User Manual (A1761, EN-US)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.